Tough and Elastic Anisotropic Triboelectric Materials Enabled by Layer‐by‐Layer Assembly
Advanced Functional Materials · 2025-06 · 35 (26)
DOI: 10.1002/adfm.202500207 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 09.02.2025. Verfasst von Tao Liu und 12 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The synergistic integration of elastic porous material with self‐powered sensing capabilities holds immense promise for smart wearable devices. However, the intrinsic contradiction between elasticity and strength has hindered the mechanical performance of elastic porous materials. This research reports a diffusion‐driven layer‐by‐layer assembly strategy to enhance the mechanical strength of elastic porous materials. As a prerequisite, the anisotropic layered structure of natural materials is leveraged to endow the porous material with fundamental elasticity. Subsequently, vacuum and chemically‐assisted enhanced solvent diffusion are sequentially employed to assemble conductive and elastic layers on cellulose from the inside out. This endows the triboelectric material (TM) with exceptional mechanical properties (elastic strain range of 0–80%, compressive strength reaching 4.55 MPa). Utilizing the TM as a sensing material, a self‐powered sensor with a response time of 48 ms and a sensitivity of 0.57 kPa −1 is constructed. Moreover, the application of the sensor in a smart wearable helmet is demonstrated, enabling remote monitoring and traceability of head impact events. This research has overcome the incompatibility between the high strength and elasticity of porous materials and offers promising avenues for their utilization in smart wearable devices.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Liu, T., Zhao, Z., Liang, R., He, H., Liu, Y., Yu, K., Chi, M., Luo, B., Wang, J., Zhang, S., Cai, C., Wang, S., & Nie, S. (2025). Tough and Elastic Anisotropic Triboelectric Materials Enabled by Layer‐by‐Layer Assembly. Advanced Functional Materials, 35(26). https://doi.org/10.1002/adfm.202500207
Vancouver
Liu T, Zhao Z, Liang R, He H, Liu Y, Yu K, et al. Tough and Elastic Anisotropic Triboelectric Materials Enabled by Layer‐by‐Layer Assembly. Advanced Functional Materials. 2025;35(26). doi:10.1002/adfm.202500207
BibTeX
@article{Liu2025,
author = {Liu, Tao and Zhao, Zhuo and Liang, Rongrong and He, Huanjie and Liu, Yanhua and Yu, Kang and Chi, Mingchao and Luo, Bin and Wang, Jinlong and Zhang, Song and Cai, Chenchen and Wang, Shuangfei and Nie, Shuangxi},
title = {Tough and Elastic Anisotropic Triboelectric Materials Enabled by Layer‐by‐Layer Assembly},
journal = {Advanced Functional Materials},
year = {2025},
volume = {35},
number = {26},
doi = {10.1002/adfm.202500207}
}
EUVIMED