Highly Efficient 3D‐Printed PVDF‐Based Triboelectric Nanogenerators Featuring Polymorphic Perovskite Nanofillers
Advanced Functional Materials · 2025-09 · 35 (39)
DOI: 10.1002/adfm.202424271 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 30.04.2025. Verfasst von Nurfatin Hafizah Zain Karimy und 7 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation, Ministry of Science, ICT and Future Planning.
Abstract (Originalsprache)
The realization of optimal performance in polyvinylidene fluoride (PVDF)‐based triboelectric nanogenerators (TENGs) is fundamentally linked to the enhancement of the β ‐phase content of PVDF ( β ‐PVDF), which is crucial for improving dielectric properties and surface charge density. Among various strategies, the incorporation of semiconducting perovskite nanofillers has been particularly effective in achieving the desired β ‐PVDF phase for TENG applications. Herein, PVDF dielectric films are embedded with polymorphic formamidinium lead triiodide (FAPbI 3 ) perovskite nanofillers and fabricated using a cost‐effective 3D direct‐ink writing setup. The phase transformation of FAPbI 3 nanofillers within the PVDF matrix, in response to varying annealing temperatures, resulted in the formation of PVDF‐FAPbI 3 ( δ ) and PVDF‐FAPbI 3 ( α ) composite films, each exhibiting distinct morphology and dielectric characteristics. The incorporation of δ ‐FAPbI 3 nanofillers rendered the composite film porous and increased the β ‐PVDF content from ≈45% to ≈83%. By converting the δ ‐FAPbI 3 into the α ‐FAPbI 3 through post‐annealing, the composite film transitioned into a mesoporous structure with enhanced tribo‐positive properties. This modification substantially improved the output performance of the TENG, achieving a peak‐to‐peak voltage ( V p‐p ) of 392 Vand a power density of 2587 µW cm − 2 . This work highlights the significant impact of perovskite polymorphism on the performance of TENG devices.
Förderung
- National Research Foundation
- Ministry of Science, ICT and Future Planning
Zitieren
APA
Karimy, N. H. Z., Li, H., Lee, H. B., Ojha, D. P., Ovhal, M. M., Devaraj, V., Lim, S., & Kang, J. (2025). Highly Efficient 3D‐Printed PVDF‐Based Triboelectric Nanogenerators Featuring Polymorphic Perovskite Nanofillers. Advanced Functional Materials, 35(39). https://doi.org/10.1002/adfm.202424271
Vancouver
Karimy NHZ, Li H, Lee HB, Ojha DP, Ovhal MM, Devaraj V, et al. Highly Efficient 3D‐Printed PVDF‐Based Triboelectric Nanogenerators Featuring Polymorphic Perovskite Nanofillers. Advanced Functional Materials. 2025;35(39). doi:10.1002/adfm.202424271
BibTeX
@article{Karimy2025,
author = {Karimy, Nurfatin Hafizah Zain and Li, Hai and Lee, Hock Beng and Ojha, Devi Prashad and Ovhal, Manoj Mayaji and Devaraj, Vasanthan and Lim, Sooman and Kang, Jae‐Wook},
title = {Highly Efficient 3D‐Printed PVDF‐Based Triboelectric Nanogenerators Featuring Polymorphic Perovskite Nanofillers},
journal = {Advanced Functional Materials},
year = {2025},
volume = {35},
number = {39},
doi = {10.1002/adfm.202424271}
}
EUVIMED