High‐Fidelity Directed Self‐Assembly Using Higher‐ χ Polystyrene‐ Block ‐Poly(Methyl Methacrylate) Derivatives for Dislocation‐Free Sub‐10 nm Features
Advanced Functional Materials · 2025-06 · 35 (24)
DOI: 10.1002/adfm.202421066 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 12.02.2025. Verfasst von Shinsuke Maekawa und 8 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Japan Society for the Promotion of Science, Japan Science and Technology Agency.
Abstract (Originalsprache)
Extreme ultraviolet (EUV) lithography currently enables the creation of ultrafine patterns. However, as miniaturization progresses, stochastic defects become a significant challenge. Directed self‐assembly (DSA) of block copolymers (BCPs) has gained attention for pattern rectification to improve the quality of EUV patterns or for density multiplication to obtain sub‐10 nm features. DSA is one of the most promising miniaturization processes because it does not cause stochastic defects. However, dislocation defects are an important issue in density multiplication using strongly segregating BCP. This study demonstrates the use of DSA on 300 mm silicon wafers with higher‐Flory‐Huggins interaction parameter ( χ ) polystyrene‐ block ‐poly(methyl methacrylate) derivatives for sub‐10 nm features. These higher‐ χ polymers, synthesized from polystyrene‐ block ‐[poly(glycidyl methacrylate)‐ random ‐poly(methyl methacrylate)] (PS‐ b ‐PGM) and 2,2,2‐trifluoroethanethiol (PS‐ b ‐PG F M), show excellent reproducibility of perpendicular lamellae. Line patterns with a sub‐10 nm half‐pitch are successfully formed by DSA on 300 mm wafers. Line patterns without parallel‐oriented structures or dislocations can be achieved by optimizing the chemical guides and annealing conditions. A polymer with a higher χN value exhibits improved roughness in the resulting line patterns.
Förderung
- Japan Society for the Promotion of Science
- Japan Science and Technology Agency
Zitieren
APA
Maekawa, S., Verstraete, L., Suh, H. S., Seshimo, T., Dazai, T., Sato, K., Hatakeyama‐Sato, K., Nabae, Y., & Hayakawa, T. (2025). High‐Fidelity Directed Self‐Assembly Using Higher‐ χ Polystyrene‐ Block ‐Poly(Methyl Methacrylate) Derivatives for Dislocation‐Free Sub‐10 nm Features. Advanced Functional Materials, 35(24). https://doi.org/10.1002/adfm.202421066
Vancouver
Maekawa S, Verstraete L, Suh HS, Seshimo T, Dazai T, Sato K, et al. High‐Fidelity Directed Self‐Assembly Using Higher‐ χ Polystyrene‐ Block ‐Poly(Methyl Methacrylate) Derivatives for Dislocation‐Free Sub‐10 nm Features. Advanced Functional Materials. 2025;35(24). doi:10.1002/adfm.202421066
BibTeX
@article{Maekawa2025,
author = {Maekawa, Shinsuke and Verstraete, Lander and Suh, Hyo Seon and Seshimo, Takehiro and Dazai, Takahiro and Sato, Kazufumi and Hatakeyama‐Sato, Kan and Nabae, Yuta and Hayakawa, Teruaki},
title = {High‐Fidelity Directed Self‐Assembly Using Higher‐ χ Polystyrene‐ Block ‐Poly(Methyl Methacrylate) Derivatives for Dislocation‐Free Sub‐10 nm Features},
journal = {Advanced Functional Materials},
year = {2025},
volume = {35},
number = {24},
doi = {10.1002/adfm.202421066}
}
EUVIMED