EUVIMEDEUVIMED entdecken
Crossref

Tailoring Stretchable, Biocompatible, and 3D Printable Properties of Carbon‐Based Conductive Hydrogel for Bioelectronic Interface Applications

Siqi Yao, Chenrui Zhang, Luge Bai, Sen Wang, Yingjie Liu, Lei Li, Xiao Li, Jiankang He, Ling Wang, Dichen Li

Advanced Functional Materials · 2025-03 · 35 (12)

DOI: 10.1002/adfm.202418554 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 12.02.2025. Verfasst von Siqi Yao und 9 weiteren Autor:innen. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Functional conductive hydrogels with customizable shapes and structures facilitate seamless integration between biological and electronic interfaces. However, the current capacity to adjust the properties of conductive gels is constrained, frequently requiring complex post‐processing methods to ensure gel formation and achieve a balance between mechanical and electrical properties. This significantly limits the flexibility in fabricating gel‐based sensing interfaces. In this study, a 3D‐printable, photo‐crosslinked, carbon‐based conductive nanocomposite hydrogel (FPCH) comprising poly(ether) F127 diacrylate (F127DA), Single‐Walled carbon nanotubes (SWCNT), and poly(3,4‐ethylenedioxythiophene)‐polystyrene sulfonic acid (PEDOT:PSS) is developed. By optimizing the proportion of conductive fillers, the hydrogel achieves tunable modulus (as low as 90 kPa), high stretchability (up to 520% strain), conductivity (440 S m −1 ), and 3D printability. The conductive gel can be rapidly cured on demand via UV‐induced crosslinking and demonstrates good biocompatibility. It functions not only as a “skin electronic tattoo” for multimodal applications, such as strain and humidity sensing and thermal compensation but also effectively stimulates the sciatic nerve in vivo at low voltage. Furthermore, electrodes fabricated using 3D printing technology offer conformal contact with brain tissue and enable real‐time monitoring of electrophysiological signals, providing a versatile bioelectronic sensing interface for multi‐modal applications adaptable for both the in vivo and in vitro environments.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Yao, S., Zhang, C., Bai, L., Wang, S., Liu, Y., Li, L., Li, X., He, J., Wang, L., & Li, D. (2025). Tailoring Stretchable, Biocompatible, and 3D Printable Properties of Carbon‐Based Conductive Hydrogel for Bioelectronic Interface Applications. Advanced Functional Materials, 35(12). https://doi.org/10.1002/adfm.202418554

Vancouver

Yao S, Zhang C, Bai L, Wang S, Liu Y, Li L, et al. Tailoring Stretchable, Biocompatible, and 3D Printable Properties of Carbon‐Based Conductive Hydrogel for Bioelectronic Interface Applications. Advanced Functional Materials. 2025;35(12). doi:10.1002/adfm.202418554

BibTeX
@article{Yao2025,
  author = {Yao, Siqi and Zhang, Chenrui and Bai, Luge and Wang, Sen and Liu, Yingjie and Li, Lei and Li, Xiao and He, Jiankang and Wang, Ling and Li, Dichen},
  title = {Tailoring Stretchable, Biocompatible, and 3D Printable Properties of Carbon‐Based Conductive Hydrogel for Bioelectronic Interface Applications},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {12},
  doi = {10.1002/adfm.202418554}
}
Kostenlos starten →