EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

In Situ Formation of a Melt‐Solid Interface Toward Stable Oxygen Reduction in Protonic Ceramic Fuel Cells

Desheng Feng, Mengran Li, Vanessa K. Peterson, Rijia Lin, Anita D'Angelo, Olexandra Marenych, Anya Yago, Dominique Appadoo, Tianjiu Zhu, Muhammad Yazid Bin Zulkifli, Shuai Gao, Yuming Wu und 3 weitere

Advanced Functional Materials · 2025-03 · 35 (12)

DOI: 10.1002/adfm.202417425 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 31.01.2025. Verfasst von Desheng Feng und 14 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: University of Queensland, Australian Research Council, Australian Nuclear Science and Technology Organisation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Protonic ceramic fuel cells (PCFCs) are one of the promising routes to generate power efficiently from various fuels at economically viable temperatures (500–700 °C) due to the use of fast proton conducting oxides as electrolytes. However, the power density and durability of the PCFCs are still limited by their cathodes made from solid metal oxides, which are challenging to address the sluggish oxygen reduction reaction and susceptibility to CO 2 simultaneously. Here, an alternative approach is reported to address this challenge by developing a new melt‐solid interface through the in situ alkali metal surface segregation and consecutive eutectic formation at perovskite oxide surface at PCFC operating temperatures. This new approach in cathode engineering is successfully demonstrated over lithium and sodium co‐doped BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3‐δ perovskite as the model material. These experimental results unveil that the unique in situ formed melt‐solid surface stabilizes the catalytically active phase in bulk and promotes catalytically active sites at surface. The novel engineered melt‐solid interface enhances the stability of the cathode against poisoning in 10% CO 2 by a factor of 1.5 in a symmetrical cell configuration and by a factor of more than two in PCFC single cells.

Förderung

  • University of Queensland
  • Australian Research Council
  • Australian Nuclear Science and Technology Organisation

Zitieren

APA

Feng, D., Li, M., Peterson, V. K., Lin, R., D'Angelo, A., Marenych, O., Yago, A., Appadoo, D., Zhu, T., Zulkifli, M. Y. B., Gao, S., Wu, Y., Tian, X., Du, X., & Zhu, Z. (2025). In Situ Formation of a Melt‐Solid Interface Toward Stable Oxygen Reduction in Protonic Ceramic Fuel Cells. Advanced Functional Materials, 35(12). https://doi.org/10.1002/adfm.202417425

Vancouver

Feng D, Li M, Peterson VK, Lin R, D'Angelo A, Marenych O, et al. In Situ Formation of a Melt‐Solid Interface Toward Stable Oxygen Reduction in Protonic Ceramic Fuel Cells. Advanced Functional Materials. 2025;35(12). doi:10.1002/adfm.202417425

BibTeX
@article{Feng2025,
  author = {Feng, Desheng and Li, Mengran and Peterson, Vanessa K. and Lin, Rijia and D'Angelo, Anita and Marenych, Olexandra and Yago, Anya and Appadoo, Dominique and Zhu, Tianjiu and Zulkifli, Muhammad Yazid Bin and Gao, Shuai and Wu, Yuming and Tian, Xiaohe and Du, Xiaoyang and Zhu, Zhonghua},
  title = {In Situ Formation of a Melt‐Solid Interface Toward Stable Oxygen Reduction in Protonic Ceramic Fuel Cells},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {12},
  doi = {10.1002/adfm.202417425}
}
Kostenlos starten →