EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier

Ying Wang, Ying Fang, Luyao Huang, Jiwei Wang, Hua Zhou, Guanyi Wang, Qingliu Wu, Guofeng Wang, Hongli Zhu

Advanced Functional Materials · 2025-01 · 35 (3)

DOI: 10.1002/adfm.202413865 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 13.09.2024. Verfasst von Ying Wang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: U.S. Department of Energy, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel‐rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC 811) cathode offers high voltage and high specific capacity, making it promising for high energy density batteries. However, large‐scale manufacturing of aqueous‐processed NMC 811 electrodes remains challenging due to proton exchange causing material decomposition and capacity loss. This work addresses this issue by constructing an in situ nanocellulose protective layer for NMC 811 particles via electrostatic interactions during the slurry preparation. For the first time, the interatomic spacing between inter‐chains of nanocellulose is measured through wide‐angle X‐ray scattering and demonstrate the ability to effectively confine interlayer water using atomistic simulations. Moreover, this nanocellulose coverage simultaneously minimizes Li + surface segregation and mitigates water infiltration. Owing to less material decomposition during the aqueous processing, nanocellulose‐protected NMC electrodes exhibit higher initial coulombic efficiency (83% vs 62% at 0.1C) and capacity (133 vs 59 mAh g −1 at 6C) than unprotected electrodes. Additionally, optimized aqueous‐processed NMC electrodes offer comparable or even superior electrochemical properties compared to the electrodes fabricated using the conventional toxic organic solvent, N‐methyl‐2‐pyrrolidone. Consequently, the developed approach enables affordable, sustainable aqueous processing for Nickel‐rich NMC 811 cathodes with excellent electrochemical performances.

Förderung

  • U.S. Department of Energy
  • National Science Foundation

Zitieren

APA

Wang, Y., Fang, Y., Huang, L., Wang, J., Zhou, H., Wang, G., Wu, Q., Wang, G., & Zhu, H. (2025). Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier. Advanced Functional Materials, 35(3). https://doi.org/10.1002/adfm.202413865

Vancouver

Wang Y, Fang Y, Huang L, Wang J, Zhou H, Wang G, et al. Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier. Advanced Functional Materials. 2025;35(3). doi:10.1002/adfm.202413865

BibTeX
@article{Wang2025,
  author = {Wang, Ying and Fang, Ying and Huang, Luyao and Wang, Jiwei and Zhou, Hua and Wang, Guanyi and Wu, Qingliu and Wang, Guofeng and Zhu, Hongli},
  title = {Stabilizing Nickel‐Rich Cathodes in Aqueous Process through Nanocellulose as Water Barrier},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {3},
  doi = {10.1002/adfm.202413865}
}
Kostenlos starten →