EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Mechanically Adaptable High‐Performance p(SBMA‐MMA) Copolymer Hydrogel with Iron (II/III) Perchlorate for Wearable Thermocell Applications

Gilyong Shin, Jae Yoon Baek, Ju Hyeon Kim, Ju Hwan Lee, Hyeong Jun Kim, Byeong Jun So, Yuseung Choi, Sungryul Yun, Taewoo Kim, Jei Gyeong Jeon, Tae June Kang

Advanced Functional Materials · 2025-03 · 35 (12)

DOI: 10.1002/adfm.202412524 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 21.10.2024. Verfasst von Gilyong Shin und 10 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 91 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Rural Development Administration, Electronics and Telecommunications Research Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quasi‐solid‐state thermocells (QTECs) show promise as a power source for wearable devices by converting body heat into electricity. While significant progress has been made with p‐type elements for QTECs, challenges remain with their n‐type counterparts. Here, a high‐performance n‐type QTEC element is presented, using a copolymer hydrogel that outperforms conventional p‐type elements. This copolymer hydrogel combines hydrophilic zwitterionic sulfobetaine methacrylate (SBMA) for ionic conduction and hydrophobic methyl methacrylate (MMA) for structural stability. By increasing the MMA content from 35 to 100 wt.%, versatile control is achieved over the hydrogel's elastic modulus (72 kPa to 127.7 MPa) and tensile strength (54 kPa to 6.7 MPa). A high mechanical toughness of 7.2 MJ m −3 is also achieved at 68 wt.% MMA. The mechanically robust and high toughness p(SBMA‐MMA) hydrogel is then immersed in Fe(ClO 4 ) 2/3 solutions of different concentrations to evaluate its performance as an n‐type QTEC element. The hydrogel with 0.8 M Fe(ClO 4 ) 2/3 exhibits a high ionic Seebeck coefficient of −1.7 mV K −1 , a power density of 1.1 mW m −2 K −2 , and an elastic modulus of 1.6 MPa, which is similar to that of human skin. Finally, the optimized n‐type p(SBMA‐MMA) hydrogels demonstrate the potential application for wearable devices.

Förderung

  • National Research Foundation of Korea
  • Rural Development Administration
  • Electronics and Telecommunications Research Institute

Zitieren

APA

Shin, G., Baek, J. Y., Kim, J. H., Lee, J. H., Kim, H. J., So, B. J., Choi, Y., Yun, S., Kim, T., Jeon, J. G., & Kang, T. J. (2025). Mechanically Adaptable High‐Performance p(SBMA‐MMA) Copolymer Hydrogel with Iron (II/III) Perchlorate for Wearable Thermocell Applications. Advanced Functional Materials, 35(12). https://doi.org/10.1002/adfm.202412524

Vancouver

Shin G, Baek JY, Kim JH, Lee JH, Kim HJ, So BJ, et al. Mechanically Adaptable High‐Performance p(SBMA‐MMA) Copolymer Hydrogel with Iron (II/III) Perchlorate for Wearable Thermocell Applications. Advanced Functional Materials. 2025;35(12). doi:10.1002/adfm.202412524

BibTeX
@article{Shin2025,
  author = {Shin, Gilyong and Baek, Jae Yoon and Kim, Ju Hyeon and Lee, Ju Hwan and Kim, Hyeong Jun and So, Byeong Jun and Choi, Yuseung and Yun, Sungryul and Kim, Taewoo and Jeon, Jei Gyeong and Kang, Tae June},
  title = {Mechanically Adaptable High‐Performance p(SBMA‐MMA) Copolymer Hydrogel with Iron (II/III) Perchlorate for Wearable Thermocell Applications},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {12},
  doi = {10.1002/adfm.202412524}
}
Kostenlos starten →