An Utrastable Mg/Zr Modified P2‐Type Na 2/3 Ni 1/3 Mn 2/3 O 2 Cathode Material for High‐Power Sodium‐Ion Batteries
Advanced Functional Materials · 2024-12 · 34 (52)
DOI: 10.1002/adfm.202411347 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 02.09.2024. Verfasst von Siqi Yuan und 11 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
P2‐Na 2/3 Ni 1/3 Mn 2/3 O 2 demonstrates high energy density owing to its high specific capacity and high discharge voltage, but suffering from rapid performance decay due to severe structural degradation and aggravated surface side reaction during high‐voltage cycling. Herein, a Mg/Zr modified Na 0.67 Ni 0.25 Mg 0.08 Mn 0.64 Zr 0.03 O 2 cathode is proposed with good structural stability and excellent cycling performance, showing reversible capacity of 123.2 mAh g −1 (0.1 C) and capacity retention of 99.1% after 100 cycles. The cycling stability is outstanding among P2‐type cathodes reported so far. In situ XRD analyses reveal a suppressed P2‐O2 phase transition after Mg modification, further incorporation of Zr greatly stabilizes the layered structure as some Zr ions reside in the Na layer providing a pinning effect to reduce the slide of TMO 2 layer. First‐principles calculations suggest that oxygen loss in Na 0.67 Ni 0.25 Mg 0.08 Mn 0.64 Zr 0.03 O 2 cathode is suppressed as Zr incorporation prevents the formation of oxygen vacancies. XPS analyses verify a Zr─O protective layer self‐segregated on particle surface during material synthesis. The expanded Na + transport channel confirmed by the XRD analysis well explains the favored Na‐ion mobility verified by a high reversible capacity of 105.5 mAh/g at 20 C. This work sheds new light on providing a practical P2‐structured cathode material for high‐power sodium ion batteries.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Yuan, S., Ding, S., Ma, J., Zheng, Q., Bao, X., Liu, Q., Cui, G., Zhang, Y., Yu, L., Wang, J., Qu, C., & Liao, X. (2024). An Utrastable Mg/Zr Modified P2‐Type Na 2/3 Ni 1/3 Mn 2/3 O 2 Cathode Material for High‐Power Sodium‐Ion Batteries. Advanced Functional Materials, 34(52). https://doi.org/10.1002/adfm.202411347
Vancouver
Yuan S, Ding S, Ma J, Zheng Q, Bao X, Liu Q, et al. An Utrastable Mg/Zr Modified P2‐Type Na 2/3 Ni 1/3 Mn 2/3 O 2 Cathode Material for High‐Power Sodium‐Ion Batteries. Advanced Functional Materials. 2024;34(52). doi:10.1002/adfm.202411347
BibTeX
@article{Yuan2024,
author = {Yuan, Siqi and Ding, Shengqi and Ma, Jun and Zheng, Qinfeng and Bao, Xu and Liu, Qian and Cui, Guijia and Zhang, Yixiao and Yu, Lei and Wang, Jia‐Wei and Qu, Changming and Liao, Xiao‐Zhen},
title = {An Utrastable Mg/Zr Modified P2‐Type Na 2/3 Ni 1/3 Mn 2/3 O 2 Cathode Material for High‐Power Sodium‐Ion Batteries},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {52},
doi = {10.1002/adfm.202411347}
}
EUVIMED