Tailoring Perovskite/C 60 Interface by Reactive Passivators for Stable Tandem Solar Cells
Advanced Functional Materials · 2024-12 · 34 (52)
DOI: 10.1002/adfm.202410737 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 15.10.2024. Verfasst von Fengtao Pei und 22 weiteren Autor:innen. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Integrating perovskite solar cells with crystalline silicon bottom cells in a monolithic two‐terminal tandem configuration enables power conversion efficiency (PCE) surpassing the theoretical limits of single‐junction cells. However, wide bandgap (WBG) perovskite films face challenges related to phase stability and open circuit voltage ( V OC ) deficit, particularly due to severe non‐radiative recombination at the perovskite/C 60 interface. Here, the interfacial defects are passivated by incorporating a reactive passivator that reacts with lead halides to form low‐dimensional phases. The target product obtained by optimizing the reaction temperature not only suppresses recombination across the interface, but also facilitates the transfer of charge carriers. More importantly, this product can suppress phase segregation of WBG perovskite films under exposure to light illumination and moisture. This strategy enables a high V OC of 1.25 V for WBG perovskite device based on polymer hole transport layer and a certified stabilized PCE of 30.52% for a monolithic perovskite/silicon tandem solar cell. The unencapsulated tandem device retains 94% of its initial PCE over 200 h under continuous 1‐sun full spectrum illumination in air, demonstrating the improved phase stability.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
Zitieren
APA
Pei, F., Wang, Q., Wei, Z., Zhuang, X., Cheng, X., Li, K., Cui, Y., Wang, L., Huang, Z., Zhang, Z., Xu, T., Zhang, Y., Cheng, T., Tang, J., Liu, G., Zhu, C., Huo, Y., Li, S., Wu, C., …, & Chen, Q. (2024). Tailoring Perovskite/C 60 Interface by Reactive Passivators for Stable Tandem Solar Cells. Advanced Functional Materials, 34(52). https://doi.org/10.1002/adfm.202410737
Vancouver
Pei F, Wang Q, Wei Z, Zhuang X, Cheng X, Li K, et al. Tailoring Perovskite/C 60 Interface by Reactive Passivators for Stable Tandem Solar Cells. Advanced Functional Materials. 2024;34(52). doi:10.1002/adfm.202410737
BibTeX
@article{Pei2024,
author = {Pei, Fengtao and Wang, Qianqian and Wei, Zejun and Zhuang, Xinmeng and Cheng, Xianghan and Li, Kailin and Cui, Yuanyuan and Wang, Lan and Huang, Zijian and Zhang, Zhongyang and Xu, Tailai and Zhang, Ying and Cheng, Teng and Tang, Jiahong and Liu, Guilin and Zhu, Cheng and Huo, Yuxuan and Li, Siqi and Wu, Cuigu and Wang, Xueyun and Zhou, Huanping and Chen, Yihua and Chen, Qi},
title = {Tailoring Perovskite/C 60 Interface by Reactive Passivators for Stable Tandem Solar Cells},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {52},
doi = {10.1002/adfm.202410737}
}
EUVIMED