EUVIMEDEUVIMED entdecken
Crossref

Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance

Manh Cuong Nguyen, Hoang Long Nguyen, Thi Phuong Mai Duong, Sung‐Hoon Kim, Ji‐Young Kim, Jee‐Hwan Bae, Hyun‐Kyung Kim, Sung Nam Lim, Wook Ahn

Advanced Functional Materials · 2024-10 · 34 (42)

DOI: 10.1002/adfm.202406987 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 17.08.2024. Verfasst von Manh Cuong Nguyen und 8 weiteren Autor:innen. Die Arbeit wurde bisher 71-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: National Research Foundation of Korea, Ministry of Education, Soonchunhyang University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylene oxide (PEO)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) is among the most promising candidates for developing solid polymer electrolytes (SPEs) for all‐solid‐state lithium‐metal batteries (ASSLMBs). However, practical applications of the PEO/LiTFSI system face challenges due to its relatively low ionic conductivity and low Li + transference number. To address these issues, a method is proposed that incorporates multiple components, including zeolitic imidazolate frameworks (ZIF‐67) as fillers and ionic liquid electrolytes (ILEs) as plasticizers, into a PEO/LiTFSI matrix. By optimizing the fabrication process, ultra‐thin membranes of the integrated electrolyte PEO/LiTFSI‐ILE‐ZIF‐67 (PLiZ) with a thickness of 32 µm are developed, achieving high ionic conductivity (1.19 × 10 −4 S cm −1 at 25 °C), broad electrochemical stability (5.66 V), and high lithium‐ion mobility (0.8). As a result, the fabricated ASSLMBs exhibited excellent cycle stability at both room temperature and 60 °C, delivering an initial specific discharge capacity of 166.4 mAh g −1 and an impressive capacity retention of 83.7% after 1000 cycles at 3C under 60 °C, corresponding to a low fading rate of 0.0163% per cycle. Additionally, the designed SPEs demonstrated high safety properties, as shown by the successful cutting and folding of a working LiFePO 4 /PLiZ/Li pouch cell. Therefore, this study presents a comprehensively improved method for developing high‐performance ASSLMBs.

Förderung

  • National Research Foundation of Korea
  • Ministry of Education
  • Soonchunhyang University

Zitieren

APA

Nguyen, M. C., Nguyen, H. L., Duong, T. P. M., Kim, S., Kim, J., Bae, J., Kim, H., Lim, S. N., & Ahn, W. (2024). Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance. Advanced Functional Materials, 34(42). https://doi.org/10.1002/adfm.202406987

Vancouver

Nguyen MC, Nguyen HL, Duong TPM, Kim S, Kim J, Bae J, et al. Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance. Advanced Functional Materials. 2024;34(42). doi:10.1002/adfm.202406987

BibTeX
@article{Nguyen2024,
  author = {Nguyen, Manh Cuong and Nguyen, Hoang Long and Duong, Thi Phuong Mai and Kim, Sung‐Hoon and Kim, Ji‐Young and Bae, Jee‐Hwan and Kim, Hyun‐Kyung and Lim, Sung Nam and Ahn, Wook},
  title = {Highly Safe, Ultra‐Thin MOF‐Based Solid Polymer Electrolytes for Superior All‐Solid‐State Lithium‐Metal Battery Performance},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {42},
  doi = {10.1002/adfm.202406987}
}
Kostenlos starten →