EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Impact of Potassium in Layered Cobalt Oxide Cathodes on Electrochemical Performance in Sodium‐Ion Batteries

Daria Mikhailova, Lea Haase, Hoang Bao An Nguyen, Alexander Thomas, Mikhail V. Gorbunov, Martin Hantusch, Maxim Avdeev

Advanced Functional Materials · 2024-11 · 34 (45)

DOI: 10.1002/adfm.202406384 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 04.06.2024. Verfasst von Daria Mikhailova und 6 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Bildung und Forschung.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rechargeable sodium‐ion batteries are promising sustainable energy storage systems, owing to their low cost and high energy density. However, the existing cathode chemistries, particularly layered sodium transition metal oxides, exhibit restricted electrochemical performance, which hinders their extensive applications. To overcome challenges, originating from kinetically limited structural transformations, various cation substitutions are reported in the literature. Especially the partial Na–K replacement is discussed recently, which can increase bulk Na‐diffusivity and suppress undesirable phase transitions. Here, a critical study of potassium doping in different layered materials P3‐K 0.5 Co 0.33 Mn 0.67 O 2 and P3‐K 0.5 Co 0.33 Mn 0.67 O 2 *0.5H 2 O with redox‐active Co (and Mn), and P2‐Na 0.7 Co 0.8 Ti 0.2 O 2 and P2‐K 0.1 Na 0.7 Co 0.8 Ti 0.2 O 2 with Co activity is presented. It is found that the presence of K significantly enhances the moisture sensitivity: P3‐K 0.5 Co 0.33 Mn 0.67 O 2 *0.5H 2 O is quickly formed in the air from K 0.5 Co 0.33 Mn 0.67 O 2 , while Na 0.7 Co 0.8 Ti 0.2 O 2 remains stable under the same conditions. In electrochemical Na‐cells, a partial K–Na cation exchange in P3‐K 0.5 Co 0.33 Mn 0.67 O 2 and P3‐K 0.5 Co 0.33 Mn 0.67 O 2 *0.5H 2 O occurs without applying current. The electrochemical performance of P3‐K 0.5 Co 0.33 Mn 0.67 O 2 is slightly increased in comparison to K‐free P2‐Na 0.67 Co 0.33 Mn O.67 O 2 from the literature, staying, however, behind the performance of Na 0.7 Co 0.8 Ti 0.2 O 2. K 0.1 Na 0.7 Co 0.8 Ti 0.2 O 2 shows weaker rate capability than isostructural Na 0.7 Co 0.8 Ti 0.2 O 2 , reflecting a negative impact of K on Na‐diffusivity. Therefore, effect of K‐incorporation in layered structures on the battery performance strongly depends on the cathode composition.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Bundesministerium für Bildung und Forschung

Zitieren

APA

Mikhailova, D., Haase, L., Nguyen, H. B. A., Thomas, A., Gorbunov, M. V., Hantusch, M., & Avdeev, M. (2024). Impact of Potassium in Layered Cobalt Oxide Cathodes on Electrochemical Performance in Sodium‐Ion Batteries. Advanced Functional Materials, 34(45). https://doi.org/10.1002/adfm.202406384

Vancouver

Mikhailova D, Haase L, Nguyen HBA, Thomas A, Gorbunov MV, Hantusch M, et al. Impact of Potassium in Layered Cobalt Oxide Cathodes on Electrochemical Performance in Sodium‐Ion Batteries. Advanced Functional Materials. 2024;34(45). doi:10.1002/adfm.202406384

BibTeX
@article{Mikhailova2024,
  author = {Mikhailova, Daria and Haase, Lea and Nguyen, Hoang Bao An and Thomas, Alexander and Gorbunov, Mikhail V. and Hantusch, Martin and Avdeev, Maxim},
  title = {Impact of Potassium in Layered Cobalt Oxide Cathodes on Electrochemical Performance in Sodium‐Ion Batteries},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {45},
  doi = {10.1002/adfm.202406384}
}
Kostenlos starten →