Thermally Conductive Hexagonal Boron Nitride/Polymer Composites for Efficient Heat Transport
Advanced Functional Materials · 2024-11 · 34 (46)
DOI: 10.1002/adfm.202405235 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 04.07.2024. Verfasst von Chengning Yao und 11 weiteren Autor:innen. Die Arbeit wurde bisher 87-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, China Scholarship Council, Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
Commercial thermally conductive dielectric materials used in electronic packaging typically exhibit thermal conductivities ( κ ) ranging from 0.8 to 4.2 W m −1 K −1 . Hexagonal boron nitride (h‐BN) flakes are promising thermally conductive materials for the thermal management of next‐generation electronics. These electrically insulating yet thermally conducting h‐BN flakes can be incorporated as thermal fillers to impart high κ to polymer‐based composites. A cellulose‐based composite embedded with few‐layer h‐BN (FLh‐BN) flakes, achieving a κ ≈ 21.7 W m −1 K −1 , prepared using a cost‐effective and scalable procedure is demonstrated. This value is >5 times higher than the κ observed in composites embedded with bulk h‐BN (Bh‐BN, κ ≈ 4.5 W m −1 K −1 ), indicating the benefits of the superior κ of FLh‐BN on the κ of h‐BN polymer composites. When applied as a paste for thermal interface material (TIM), the FLh‐BN composite can reduce the maximum temperature ( T max ) by 24.5 °C of a heating pad at a power density ( h ) of 2.48 W cm −2 compared to Bh‐BN composites at the same h‐BN loading. The results provide an effective approach to improve the κ of cellulose‐based thermal pastes for TIMs and demonstrate their viability for heat dissipation in integrated circuits (ICs) and high‐power electronic devices.
Förderung
- European Commission
- China Scholarship Council
- Engineering and Physical Sciences Research Council
Zitieren
APA
Yao, C., Leahu, G., Holicky, M., Liu, S., Fenech‐Salerno, B., Lai, M. C., Larciprete, M. C., Ducati, C., Divitini, G., Voti, R. L., Sibilia, C., & Torrisi, F. (2024). Thermally Conductive Hexagonal Boron Nitride/Polymer Composites for Efficient Heat Transport. Advanced Functional Materials, 34(46). https://doi.org/10.1002/adfm.202405235
Vancouver
Yao C, Leahu G, Holicky M, Liu S, Fenech‐Salerno B, Lai MC, et al. Thermally Conductive Hexagonal Boron Nitride/Polymer Composites for Efficient Heat Transport. Advanced Functional Materials. 2024;34(46). doi:10.1002/adfm.202405235
BibTeX
@article{Yao2024,
author = {Yao, Chengning and Leahu, Grigore and Holicky, Martin and Liu, Sihui and Fenech‐Salerno, Benji and Lai, May Ching and Larciprete, Maria Cristina and Ducati, Caterina and Divitini, Giorgio and Voti, Roberto Li and Sibilia, Concita and Torrisi, Felice},
title = {Thermally Conductive Hexagonal Boron Nitride/Polymer Composites for Efficient Heat Transport},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {46},
doi = {10.1002/adfm.202405235}
}
EUVIMED