On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries
Advanced Functional Materials · 2024-10 · 34 (40)
DOI: 10.1002/adfm.202403841 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 22.04.2024. Verfasst von Yuke Wang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Hard carbon (HC) with low cost and high specific capacity is considered the appropriate anode material for sodium‐ion batteries (SIBs), but the low initial coulombic efficiency (ICE) caused by solid electrolyte interface (SEI) formation and inherent active defects impede its practical battery application. Here, the practicability of solid‐state electrochemical (SSE) pre‐sodiation technique for hard carbon anode is assessed to conquer such challenges. The uniformly pre‐sodiated HC (Pre‐HC) can be fabricated through the SSE reaction between the HC and preloaded sodium metal film without introducing a liquid electrolyte. After being immerged in the electrolyte, a thin artificial SEI with abundant inorganic species is formed on the surface of Pre‐HC due to the spontaneous chemical reaction, and the ICE of HC is improved from 76.0% to 107.9%. Full cell paired with Na 3 V 2 (PO 4 ) 3 cathode exhibits a high ICE of 94.0% with 70% of energy density augment (from 126.5 to 214.4 Wh kg −1 ) after anode pre‐sodiation. Pre‐HC anode still retains the pre‐sodiation capacity of 671.1 mAh g Na −1 after being stored in the dry air for 2 h. This work demonstrates the practical applicability of this SSE pre‐sodiation strategy to enhance the energy density of SIBs.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, Y., Lu, J., Dai, W., Cheng, X., Zuo, J., Lei, H., Liu, W., & Fu, Z. (2024). On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries. Advanced Functional Materials, 34(40). https://doi.org/10.1002/adfm.202403841
Vancouver
Wang Y, Lu J, Dai W, Cheng X, Zuo J, Lei H, et al. On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries. Advanced Functional Materials. 2024;34(40). doi:10.1002/adfm.202403841
BibTeX
@article{Wang2024,
author = {Wang, Yuke and Lu, Jia and Dai, Wangqi and Cheng, Xinyu and Zuo, Jinning and Lei, Huanhao and Liu, Wen and Fu, Zhengwen},
title = {On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {40},
doi = {10.1002/adfm.202403841}
}
EUVIMED