Oxygen Driven Defect Engineering of Monolayer MoS 2 for Tunable Electronic, Optoelectronic, and Electrochemical Devices
Advanced Functional Materials · 2024-09 · 34 (37)
DOI: 10.1002/adfm.202402402 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 14.03.2024. Verfasst von Irfan H. Abidi und 17 weiteren Autor:innen. Die Arbeit wurde bisher 107-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council, Office of National Intelligence.
Abstract (Originalsprache)
Molybdenum disulfide (MoS 2 ), a two‐dimensional (2D) semiconducting material harbors intrinsic defects that can be harnessed to achieve tuneable electronic, optoelectronic, and electrochemical devices. However, achieving precise control over defect formation within monolayer MoS 2 , remains a notable challenge. Here, an in‐situ defect engineering approach for monolayer MoS 2 using a pressure‐dependent chemical vapor deposition (CVD) process is presented. Monolayer MoS 2 grown in a low pressure CVD conditions (LP‐MoS 2 ) produces sulfur vacancy ( V s ) induced defect‐rich crystals primarily attributed to the oxygen‐deficient growth conditions. Conversely, atmospheric pressure CVD‐grown MoS 2 (AP‐MoS 2 ) passivates these defects with oxygen from ambient conditions. This disparity in defect profiles profoundly impacts crucial functional properties and device performance. AP‐MoS 2 shows a drastically enhanced photoluminescence, which is significantly quenched in LP‐MoS 2 attributed to in‐gap electron donor states induced by the V s defects. However, the n‐doping induced in LP‐MoS 2 generates enhanced photoresponsivity and detectivity in fabricated photodetectors compared to the AP‐MoS 2 ‐based devices. Defect‐rich LP‐MoS 2 outperforms AP‐MoS 2 as channel layers of field‐effect transistors (FETs), as well as electrocatalytic material for hydrogen evolution reaction (HER). This work presents a single‐step CVD approach for in situ defect engineering in monolayer MoS 2 and presents a pathway to control defects in other monolayer 2D materials.
Förderung
- Australian Research Council
- Office of National Intelligence
Zitieren
APA
Abidi, I. H., Giridhar, S. P., Tollerud, J. O., Limb, J., Waqar, M., Mazumder, A., Mayes, E. L., Murdoch, B. J., Xu, C., Bhoriya, A., Ranjan, A., Ahmed, T., Li, Y., Davis, J. A., Bentley, C. L., Russo, S. P., Gaspera, E. D., & Walia, S. (2024). Oxygen Driven Defect Engineering of Monolayer MoS 2 for Tunable Electronic, Optoelectronic, and Electrochemical Devices. Advanced Functional Materials, 34(37). https://doi.org/10.1002/adfm.202402402
Vancouver
Abidi IH, Giridhar SP, Tollerud JO, Limb J, Waqar M, Mazumder A, et al. Oxygen Driven Defect Engineering of Monolayer MoS 2 for Tunable Electronic, Optoelectronic, and Electrochemical Devices. Advanced Functional Materials. 2024;34(37). doi:10.1002/adfm.202402402
BibTeX
@article{Abidi2024,
author = {Abidi, Irfan H. and Giridhar, Sindhu Priya and Tollerud, Jonathan O. and Limb, Jake and Waqar, Moaz and Mazumder, Aishani and Mayes, Edwin LH and Murdoch, Billy J. and Xu, Chenglong and Bhoriya, Ankit and Ranjan, Abhishek and Ahmed, Taimur and Li, Yongxiang and Davis, Jeffrey A. and Bentley, Cameron L. and Russo, Salvy P. and Gaspera, Enrico Della and Walia, Sumeet},
title = {Oxygen Driven Defect Engineering of Monolayer MoS 2 for Tunable Electronic, Optoelectronic, and Electrochemical Devices},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {37},
doi = {10.1002/adfm.202402402}
}
EUVIMED