Electro‐Conductive Ti 3 C 2 MXene Multilayered Membranes: Dye Removal and Antifouling Performance
Advanced Functional Materials · 2024-09 · 34 (36)
DOI: 10.1002/adfm.202401970 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 22.03.2024. Verfasst von Zahra Zandi und 11 weiteren Autor:innen. Die Arbeit wurde bisher 72-mal zitiert (Crossref) und nennt 100 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada's Oil Sands Innovation Alliance.
Abstract (Originalsprache)
This work describes the fabrication of a novel electroconductive membrane made of Ti 3 C 2 T x (MXene) nanosheet coating through a one‐step pressure‐assisted technique. Ti 3 C 2 ‐MXene is firmly attached over a polyamide–imide (PAI) microfilter by employing a binder composed of carboxymethyl cellulose (CMC)/glutaraldehyde (GA). Through coating a proper amount of multilayer Ti 3 C 2 ‐MXene, the electrical conductivity of 174 ± 0.16 S m −1 is achieved. The rejection rates of reactive red 120 (RR120), reactive black (RB), and methyl orange (MO) by the pristine PAI membrane are 45.2%, 40.81%, and 33.65%, respectively. However, rejection rates significantly improve with the Ti 3 C 2 MXene coating to over 99.71%, 97.95%, and 68.91% for RR120, RB, and MO. Applying a 4 V cathodic potential resulted in a flux recovery ratio (FRR) of 99.83% and a flux decline rate (FDR) of less than 1% during humic acid (HA) filtration. Without applying voltage, the MXene‐coated membrane shows an FRR and FDR of 92.51% and 45.56%, respectively. Surface energy analysis reveals strong repulsive interactions between foulants and the membrane surface. Moreover, the surface free energy indicates that foulants such as sodium alginate (SA) and bovine serum albumin (BSA) exhibit stronger adhesion to the membrane than HA, consistent with the fouling experiment results.
Förderung
- Natural Sciences and Engineering Research Council of Canada
- Canada's Oil Sands Innovation Alliance
Zitieren
APA
Zandi, Z., Rastgar, M., Mohseni, M., Firouzjaei, M. D., Dilokekunakul, W., Anasori, B., Vecitis, C. D., Keller, R., Wessling, M., Elliott, M., Rahimpour, A., & Sadrzadeh, M. (2024). Electro‐Conductive Ti 3 C 2 MXene Multilayered Membranes: Dye Removal and Antifouling Performance. Advanced Functional Materials, 34(36). https://doi.org/10.1002/adfm.202401970
Vancouver
Zandi Z, Rastgar M, Mohseni M, Firouzjaei MD, Dilokekunakul W, Anasori B, et al. Electro‐Conductive Ti 3 C 2 MXene Multilayered Membranes: Dye Removal and Antifouling Performance. Advanced Functional Materials. 2024;34(36). doi:10.1002/adfm.202401970
BibTeX
@article{Zandi2024,
author = {Zandi, Zahra and Rastgar, Masoud and Mohseni, Mojtaba and Firouzjaei, Mostafa Dadashi and Dilokekunakul, Waralee and Anasori, Babak and Vecitis, Chad D. and Keller, Robert and Wessling, Matthias and Elliott, Mark and Rahimpour, Ahmad and Sadrzadeh, Mohtada},
title = {Electro‐Conductive Ti 3 C 2 MXene Multilayered Membranes: Dye Removal and Antifouling Performance},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {36},
doi = {10.1002/adfm.202401970}
}
EUVIMED