EUVIMEDEUVIMED entdecken
Crossref

Surface Work Function Modifier to Modulate Electrolyte Decomposition on Negative Electrode in Lithium‐Ion Batteries

Jooeun Byun, Chae Rim Lee, Wontak Kim, Min A Lee, Ho Yeon Jang, Chihyun Hwang, Jun Ho Song, Ji‐Sang Yu, Seoin Back, Ki Jae Kim, Hyun‐seung Kim

Advanced Functional Materials · 2024-08 · 34 (32)

DOI: 10.1002/adfm.202401620 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 14.03.2024. Verfasst von Jooeun Byun und 10 weiteren Autor:innen. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The persistent decomposition of electrolytes on graphite and silicon electrodes in lithium‐ion batteries (LIBs) is typically mitigated by the formation of a solid electrolyte interphase (SEI). However, the inadequate formation and chemo‐mechanical degradation of SEI leads to re‐exposure of electrode to electrolyte, contributing to the deterioration of LIBs. To address this issue, tris (2,4‐pentanedionato)indium(III) (InAc) is incorporated into the work function tailoring additive. While conventional additives strengthen the chemo‐mechanical properties of SEI through compositional modifications derived from specific elements, InAc uniquely alters charge transfer across the electrode surface, facilitated by high or low work function layer. This additive establishes an interlayer between the SEI and graphite/SiO surfaces, attributed to its tailored lowest unoccupied molecular orbital energy level. Consequently, the exposure of graphite surface to the electrolyte is minimized by interlayer during cycling. The interlayer possesses a higher work function than lithiated graphite and suppresses further electrolyte decomposition on graphite. In contrast, the interlayer on SiO decreases work function of SiO surface, which promotes the formation of inorganic SEI on SiO. Hence the degradation of SEI is suppressed with LiIn layer at SiO electrode. This leads to a reduction in the ongoing accumulation of SEI, thereby enhancing durability of LIBs.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Byun, J., Lee, C. R., Kim, W., Lee, M. A., Jang, H. Y., Hwang, C., Song, J. H., Yu, J., Back, S., Kim, K. J., & Kim, H. (2024). Surface Work Function Modifier to Modulate Electrolyte Decomposition on Negative Electrode in Lithium‐Ion Batteries. Advanced Functional Materials, 34(32). https://doi.org/10.1002/adfm.202401620

Vancouver

Byun J, Lee CR, Kim W, Lee MA, Jang HY, Hwang C, et al. Surface Work Function Modifier to Modulate Electrolyte Decomposition on Negative Electrode in Lithium‐Ion Batteries. Advanced Functional Materials. 2024;34(32). doi:10.1002/adfm.202401620

BibTeX
@article{Byun2024,
  author = {Byun, Jooeun and Lee, Chae Rim and Kim, Wontak and Lee, Min A and Jang, Ho Yeon and Hwang, Chihyun and Song, Jun Ho and Yu, Ji‐Sang and Back, Seoin and Kim, Ki Jae and Kim, Hyun‐seung},
  title = {Surface Work Function Modifier to Modulate Electrolyte Decomposition on Negative Electrode in Lithium‐Ion Batteries},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {32},
  doi = {10.1002/adfm.202401620}
}
Kostenlos starten →