Low‐Temperature Dual‐Material Area‐Selective Deposition: Molybdenum Hexafluoride‐Mediated SiO 2 Fluorination/Passivation for Self‐Aligned Molybdenum/Metal Oxide Nanoribbons
Advanced Functional Materials · 2024-08 · 34 (33)
DOI: 10.1002/adfm.202316872 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 25.04.2024. Verfasst von Hwan Oh und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Semiconductor Research Corporation, State of North Carolina, National Science Foundation.
Abstract (Originalsprache)
Area‐selective deposition (ASD) is a forefront nanopatterning technique gaining substantial attention in the semiconductor industry. While current research primarily addresses single‐material ASD, exploring multi‐material ASD is essential for mitigating complexity in advanced nanopatterning. This study describes molybdenum hexafluoride (MoF 6 )‐mediated fluorination/passivation of the hydroxylated SiO 2 (SiO 2 ‒OH) at 250 °C as a new method to pacify nucleation during subsequent ZnO and TiO 2 atomic layer deposition (ALD). In contrast, Al 2 O 3 ALD is not passivated on the fluorinated SiO 2 (SiO 2 ‒F). The study further shows that Mo ALD using MoF 6 and silane (1 wt% SiH 4 in Ar) selectively proceeds on hydrogen‐terminated Si (Si‒H), whereas SiO 2 ‒OH becomes fluorine‐passivated without observable Mo deposition. This enables subsequent ZnO and TiO 2 ASD on Mo versus SiO 2 ‒F, as confirmed by X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM). Proposed growth and inhibition mechanisms highlight the importance of the metal oxide precursor in achieving selectivity. Taken together, self‐aligned Mo/ZnO and Mo/TiO 2 nanoribbons are demonstrated on coplanar nanoscale Si‒H/SiO 2 ‒OH patterns by sequentially integrating two individual ASD processes: 1) Mo ASD on Si‒H versus SiO 2 ‒OH; and 2) ZnO or TiO 2 ASD on Mo versus SiO 2 ‒F. This work highlights the potential for this approach in new ASD systems.
Förderung
- Semiconductor Research Corporation
- State of North Carolina
- National Science Foundation
Zitieren
APA
Oh, H., Thelven, J. M., Margavio, H. R. M., & Parsons, G. N. (2024). Low‐Temperature Dual‐Material Area‐Selective Deposition: Molybdenum Hexafluoride‐Mediated SiO 2 Fluorination/Passivation for Self‐Aligned Molybdenum/Metal Oxide Nanoribbons. Advanced Functional Materials, 34(33). https://doi.org/10.1002/adfm.202316872
Vancouver
Oh H, Thelven JM, Margavio HRM, Parsons GN. Low‐Temperature Dual‐Material Area‐Selective Deposition: Molybdenum Hexafluoride‐Mediated SiO 2 Fluorination/Passivation for Self‐Aligned Molybdenum/Metal Oxide Nanoribbons. Advanced Functional Materials. 2024;34(33). doi:10.1002/adfm.202316872
BibTeX
@article{Oh2024,
author = {Oh, Hwan and Thelven, Jeremy M. and Margavio, Hannah R. M. and Parsons, Gregory N.},
title = {Low‐Temperature Dual‐Material Area‐Selective Deposition: Molybdenum Hexafluoride‐Mediated SiO 2 Fluorination/Passivation for Self‐Aligned Molybdenum/Metal Oxide Nanoribbons},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {33},
doi = {10.1002/adfm.202316872}
}
EUVIMED