EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scaling up Simultaneous Exfoliation and 2H to 1T Phase Transformation of MoS 2

Patlolla Sai Kiran, Krishnappagari Vijay Kumar, Niranjan Pandit, Satish Indupuri, Rahul Kumar, Vedant Vinod Wagh, Aminul Islam, Anup Kumar Keshri

Advanced Functional Materials · 2024-07 · 34 (29)

DOI: 10.1002/adfm.202316266 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 18.03.2024. Verfasst von Patlolla Sai Kiran und 7 weiteren Autor:innen. Die Arbeit wurde bisher 69-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aeronautics Research and Development Board, Department of Science and Technology, Ministry of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large‐scale production of high‐quality ultrathin layers (1–3 nm) of molybdenum disulfide (MoS 2 ) with absolute (≈100%) 1T‐phase is still in its infancy. Therefore, it is extremely crucial to have a technique for the mass production of ultrathin 1T‐MoS 2 layers. Here, a direct, single‐step, and ultra‐fast technique that produces high‐quality ultrathin layers of 1T‐MoS 2 with a production rate as high as 58 g h −1 without the usage of any intercalates or solvents is demonstrated. The exfoliated ultrathin 1T‐MoS 2 layers exhibited ≈100% 1T‐phase with a large specific surface area (67 m 2 g −1 ), higher electrical conductivity (140 S m −1 ), high thermal stability (up to 500 °C) and hydrophilicity (water contact angle (WCA): ≈23.4⁰). The ultrathin 1T‐MoS 2 layers showed a higher specific capacitance of 420 F g −1 ; perhaps an ideal candidate for the electrodes of supercapacitors. Moreover, the ultrathin 1T‐MoS 2 layer exhibited better mechanical flexibility and retained its original performance on bending between 0 and 180⁰ angles. Further, to assess the adeptness of the protocol, An initial trial is done on other transition metal dichalcogenides (TMDs) i.e., tungsten disulfide (WS 2 ), and observe similar results. The work sheds light on the simultaneous exfoliation and phase transformation of TMDs in large quantities, and detailed proofs‐of‐concept demonstrate its application in next‐generation energy storage devices.

Förderung

  • Aeronautics Research and Development Board
  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Kiran, P. S., Kumar, K. V., Pandit, N., Indupuri, S., Kumar, R., Wagh, V. V., Islam, A., & Keshri, A. K. (2024). Scaling up Simultaneous Exfoliation and 2H to 1T Phase Transformation of MoS 2. Advanced Functional Materials, 34(29). https://doi.org/10.1002/adfm.202316266

Vancouver

Kiran PS, Kumar KV, Pandit N, Indupuri S, Kumar R, Wagh VV, et al. Scaling up Simultaneous Exfoliation and 2H to 1T Phase Transformation of MoS 2. Advanced Functional Materials. 2024;34(29). doi:10.1002/adfm.202316266

BibTeX
@article{Kiran2024,
  author = {Kiran, Patlolla Sai and Kumar, Krishnappagari Vijay and Pandit, Niranjan and Indupuri, Satish and Kumar, Rahul and Wagh, Vedant Vinod and Islam, Aminul and Keshri, Anup Kumar},
  title = {Scaling up Simultaneous Exfoliation and 2H to 1T Phase Transformation of MoS 2},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {29},
  doi = {10.1002/adfm.202316266}
}
Kostenlos starten →