Efforts Toward the Fabrication of Thermoelectric Cooling Module Based on N‐Type and P‐Type PbTe Ingots
Advanced Functional Materials · 2024-06 · 34 (26)
DOI: 10.1002/adfm.202315707 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 25.02.2024. Verfasst von Shibo Liu und 9 weiteren Autor:innen. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
Thermoelectric cooling has gained much attention due to its significant application in 5G communication chip cooling. Enhancing the performance of thermoelectric cooling devices is an imminent and pressing concern. Applying the same material for both n ‐type and p ‐type components can promote the compatibility of thermoelectric cooling module due to their similar mechanical properties. This work focuses on the development of thermoelectric cooling module based on n ‐type and p ‐type PbTe ingots. The high ZT values near room temperature are achieved through fabricating PbTe ingots. This approach substantially enhances the carrier mobility by minimizing charge carrier scattering at grain boundaries compared to polycrystals. These optimized ingots are then utilized to construct a thermoelectric cooling device consisting of seven pairs of thermoelectric couples, which achieves a maximum cooling temperature difference of ≈14 K at room temperature and ≈28 K at 350 K. This study offers fresh insights into the development of thermoelectric cooling module using PbTe‐based materials.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Natural Science Foundation of Beijing Municipality
- Higher Education Discipline Innovation Project
- National Science Fund for Distinguished Young Scholars
Zitieren
APA
Liu, S., Qin, Y., Wen, Y., Shi, H., Qin, B., Hong, T., Gao, X., Cao, Q., Chang, C., & Zhao, L. (2024). Efforts Toward the Fabrication of Thermoelectric Cooling Module Based on N‐Type and P‐Type PbTe Ingots. Advanced Functional Materials, 34(26). https://doi.org/10.1002/adfm.202315707
Vancouver
Liu S, Qin Y, Wen Y, Shi H, Qin B, Hong T, et al. Efforts Toward the Fabrication of Thermoelectric Cooling Module Based on N‐Type and P‐Type PbTe Ingots. Advanced Functional Materials. 2024;34(26). doi:10.1002/adfm.202315707
BibTeX
@article{Liu2024,
author = {Liu, Shibo and Qin, Yongxin and Wen, Yi and Shi, Haonan and Qin, Bingchao and Hong, Tao and Gao, Xiang and Cao, Qian and Chang, Cheng and Zhao, Li‐Dong},
title = {Efforts Toward the Fabrication of Thermoelectric Cooling Module Based on N‐Type and P‐Type PbTe Ingots},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {26},
doi = {10.1002/adfm.202315707}
}
EUVIMED