EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Nanoporous, Gas Permeable PEGDA Ink for 3D Printing Organ‐on‐a‐Chip Devices

Vahid Karamzadeh, Molly L. Shen, Houda Shafique, Felix Lussier, David Juncker

Advanced Functional Materials · 2024-07 · 34 (28)

DOI: 10.1002/adfm.202315035 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 03.06.2024. Verfasst von Vahid Karamzadeh und 4 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Fonds de recherche du Québec – Nature et technologies, Canada Excellence Research Chairs, Government of Canada, Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polydimethylsiloxane (PDMS), commonly used in organ‐on‐a‐chip (OoC) systems, faces limitations in replicating complex geometries, hindering its effectiveness in creating 3D OoC models. In contrast, poly(ethylene glycol)diacrylate (PEGDA‐250), favored for its fabrication ease and resistance to small molecule absorption, is increasingly used for 3D printing microfluidic devices. However, applications in cell culture have been limited due to poor cell adhesion. Here, a nanoporous PEGDA ink (P‐PEGDA) is introduced to enhance cell adhesion. P‐PEGDA is formulated with a porogen, photopolymerized, followed by the porogen removal. Utilizing P‐PEGDA, complex microstructures, and membranes as thin as 27 µm are 3D‐printed. Porogen concentrations from 10 to 30% are tested yielding constructs with increasing porosity and oxygen permeability surpassing PDMS, without compromising printing resolution. Tests across four cell lines show >80% cell viability, with a notable 77‐fold increase in MDA‐MB‐231 cell coverage on the porous scaffolds. Finally, an OoC model comprising a gyroid scaffold with a central opening filled with a cancer spheroid is introduced. This setup, after a 14 days co‐culture, demonstrates significant endothelial sprouting and integration within the spheroid. The P‐PEGDA formulation is suitable for high‐resolution 3D printing of constructs for 3D cell culture and OoC owing to its printability, gas permeability, biocompatibility, and cell adhesion.

Förderung

  • Fonds de recherche du Québec – Nature et technologies
  • Canada Excellence Research Chairs, Government of Canada
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Karamzadeh, V., Shen, M. L., Shafique, H., Lussier, F., & Juncker, D. (2024). Nanoporous, Gas Permeable PEGDA Ink for 3D Printing Organ‐on‐a‐Chip Devices. Advanced Functional Materials, 34(28). https://doi.org/10.1002/adfm.202315035

Vancouver

Karamzadeh V, Shen ML, Shafique H, Lussier F, Juncker D. Nanoporous, Gas Permeable PEGDA Ink for 3D Printing Organ‐on‐a‐Chip Devices. Advanced Functional Materials. 2024;34(28). doi:10.1002/adfm.202315035

BibTeX
@article{Karamzadeh2024,
  author = {Karamzadeh, Vahid and Shen, Molly L. and Shafique, Houda and Lussier, Felix and Juncker, David},
  title = {Nanoporous, Gas Permeable PEGDA Ink for 3D Printing Organ‐on‐a‐Chip Devices},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {28},
  doi = {10.1002/adfm.202315035}
}
Kostenlos starten →