EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward Sustainability in All‐Printed Accumulation Mode Organic Electrochemical Transistors

Anatolii Makhinia, Lize Bynens, Arwin Goossens, Jasper Deckers, Laurence Lutsen, Koen Vandewal, Wouter Maes, Valerio Beni, Peter Andersson Ersman

Advanced Functional Materials · 2024-07 · 34 (28)

DOI: 10.1002/adfm.202314857 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 11.03.2024. Verfasst von Anatolii Makhinia und 8 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Future and Emerging Technologies.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports on the first all‐printed vertically stacked organic electrochemical transistors (OECTs) operating in accumulation mode; the devices, relying on poly([4,4′‐bis(2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy)‐2,2′‐bithiophen‐5,5′‐diyl]‐ alt ‐[thieno[3,2‐ b ]thiophene‐2,5‐diyl]) (pgBTTT) as the active channel material, are fabricated via a combination of screen and inkjet printing technologies. The resulting OECTs ( W / L ≈5) demonstrate good switching performance; g m, norm ≈13 mS cm −1 , µC* ≈21 F cm −1 V −1 s −1 , ON–OFF ratio > 10 4 and good cycling stability upon continuous operation for 2 h. The inkjet printing process of pgBTTT is established by first solubilizing the polymer in dihydrolevoglucosenone (Cyrene), a non‐toxic, cellulose‐derived, and biodegradable solvent. The resulting ink formulations exhibit good jettability, thereby providing reproducible and stable p‐type accumulation mode all‐printed OECTs with high performance. Besides the environmental and safety benefits of this solvent, this study also demonstrates the assessment of how the solvent affects the performance of spin‐coated OECTs, which justifies the choice of Cyrene as an alternative to commonly used harmful solvents such as chloroform, also from a device perspective. Hence, this approach shows a new possibility of obtaining more sustainable printed electronic devices, which will eventually result in all‐printed OECT‐based logic circuits operating in complementary mode.

Förderung

  • H2020 Future and Emerging Technologies

Zitieren

APA

Makhinia, A., Bynens, L., Goossens, A., Deckers, J., Lutsen, L., Vandewal, K., Maes, W., Beni, V., & Ersman, P. A. (2024). Toward Sustainability in All‐Printed Accumulation Mode Organic Electrochemical Transistors. Advanced Functional Materials, 34(28). https://doi.org/10.1002/adfm.202314857

Vancouver

Makhinia A, Bynens L, Goossens A, Deckers J, Lutsen L, Vandewal K, et al. Toward Sustainability in All‐Printed Accumulation Mode Organic Electrochemical Transistors. Advanced Functional Materials. 2024;34(28). doi:10.1002/adfm.202314857

BibTeX
@article{Makhinia2024,
  author = {Makhinia, Anatolii and Bynens, Lize and Goossens, Arwin and Deckers, Jasper and Lutsen, Laurence and Vandewal, Koen and Maes, Wouter and Beni, Valerio and Ersman, Peter Andersson},
  title = {Toward Sustainability in All‐Printed Accumulation Mode Organic Electrochemical Transistors},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {28},
  doi = {10.1002/adfm.202314857}
}
Kostenlos starten →