3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation
Advanced Functional Materials · 2024-05 · 34 (21)
DOI: 10.1002/adfm.202314471 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 21.12.2023. Verfasst von Fucheng Wang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 149-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Guangdong Province, Science, Technology and Innovation Commission of Shenzhen Municipality.
Abstract (Originalsprache)
Electronic devices based on conducting polymer hydrogels have emerged as one of the most promising implantable bioelectronics for electrophysiological monitoring and diagnosis of a wide spectrum of diseases, in light of their distinct conductivity and biocompatibility. However, most conducting polymer hydrogels‐based bioelectronics are routinely fabricated through conventional techniques, which are challenged by its intrinsic poor processability of conducting polymers, as well as the essentially fragile biointerface, thus hampering their rapid innovation and application in advanced implantable bioelectronics. Here, 3D printable hydrogels based on poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is reported, featuring superior 3D printability for direct ink writing (DIW), tissue‐like mechanical compliance (Young's modulus of 650 kPa), instant and tough bioadhesion (interfacial toughness of 200 J m −2 and shear strength of 120 kPa), highly‐tunable electrical properties, as well as long‐term in vitro and in vivo structural and electrochemical robustness. Electro‐physiological studies rat heart models with normal or arrhythmic conditions highlight the capabilities of establishing conformal biointerface with the dynamic organs, allowing for long‐term and high‐precision spatiotemporary epicardial electrophysiological monitoring, as well as electrical modulation of acute myocardial infarction (MI) model. These advances provide a promising strategy to improve the tissue‐electronics interfacing, and could serve as the basis for the next generation bioelectronics toward healthcare monitoring, diagnosis and medical therapies.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Guangdong Province
- Science, Technology and Innovation Commission of Shenzhen Municipality
Zitieren
APA
Wang, F., Xue, Y., Chen, X., Zhang, P., Shan, L., Duan, Q., Xing, J., Lan, Y., Lu, B., & Liu, J. (2024). 3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation. Advanced Functional Materials, 34(21). https://doi.org/10.1002/adfm.202314471
Vancouver
Wang F, Xue Y, Chen X, Zhang P, Shan L, Duan Q, et al. 3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation. Advanced Functional Materials. 2024;34(21). doi:10.1002/adfm.202314471
BibTeX
@article{Wang2024,
author = {Wang, Fucheng and Xue, Yu and Chen, Xingmei and Zhang, Pei and Shan, Liangjie and Duan, Qingfang and Xing, Junfei and Lan, Yang and Lu, Baoyang and Liu, Ji},
title = {3D Printed Implantable Hydrogel Bioelectronics for Electrophysiological Monitoring and Electrical Modulation},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {21},
doi = {10.1002/adfm.202314471}
}
EUVIMED