EUVIMEDEUVIMED entdecken
Crossref

Lightweight Zn‐Philic 3D‐Cu Scaffold for Customizable Zinc Ion Batteries

Shaohong Shi, Dongcheng Zhou, Yuheng Jiang, Fangchao Cheng, Jianping Sun, Quanquan Guo, Yiteng Luo, Yungui Chen, Wei Liu

Advanced Functional Materials · 2024-06 · 34 (24)

DOI: 10.1002/adfm.202312664 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 07.02.2024. Verfasst von Shaohong Shi und 8 weiteren Autor:innen. Die Arbeit wurde bisher 81-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous metal current collectors (CCs) serve as key component for aqueous Zn‐ion batteries (AZIBs). Herein, a lightweight 3D‐Cu architecture with customizable geometries is developed to enable reversible Zn‐metal cycling. The 3D‐Cu is prepared by 3D‐printing a crosslink‐able polymer scaffold followed by Cu‐metallization. The printed architecture is optimized to endow 3D‐Cu with electric conductivity that is on‐par with commercial Cu foam, but can reduce ≈80% of the weight and consumption of Cu. A Zn‐philic graphene (Gr) coating is adopted to promote uniform and (002)‐preferred Zn growth onto the 3D‐Cu surface, creating a 3DP‐Cu@Gr architecture that induces conformal Zn‐deposition and greatly suppressed H 2 ‐evolution reaction. The 3DP‐Cu@Gr||Zn shows stable 700 cycles at 4 mA cm −2 and 2 mAh cm −2 , with coulombic efficiency >99.6%. Zn‐loaded 3D‐electrodes enable symmetrical cells with stable 300 h cycling at 10 mA cm −2 , delivering a specific accumulated capacity of 86.7 Ah g −1 . This represents an unprecedented combination of cycle stability, high charge rate, and electrode lightweight. The all‐printed pantacle‐shape full pouch cells (3.6 mAh) exhibit 91.4% capacity retention after 200 cycles at 1 C. Possessing unusual design freedom, this strategy demonstrates a pathway for developing lightweight Cu CCs and customizable high‐energy AZIBs.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Shi, S., Zhou, D., Jiang, Y., Cheng, F., Sun, J., Guo, Q., Luo, Y., Chen, Y., & Liu, W. (2024). Lightweight Zn‐Philic 3D‐Cu Scaffold for Customizable Zinc Ion Batteries. Advanced Functional Materials, 34(24). https://doi.org/10.1002/adfm.202312664

Vancouver

Shi S, Zhou D, Jiang Y, Cheng F, Sun J, Guo Q, et al. Lightweight Zn‐Philic 3D‐Cu Scaffold for Customizable Zinc Ion Batteries. Advanced Functional Materials. 2024;34(24). doi:10.1002/adfm.202312664

BibTeX
@article{Shi2024,
  author = {Shi, Shaohong and Zhou, Dongcheng and Jiang, Yuheng and Cheng, Fangchao and Sun, Jianping and Guo, Quanquan and Luo, Yiteng and Chen, Yungui and Liu, Wei},
  title = {Lightweight Zn‐Philic 3D‐Cu Scaffold for Customizable Zinc Ion Batteries},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {24},
  doi = {10.1002/adfm.202312664}
}
Kostenlos starten →