Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials
Advanced Functional Materials · 2024-04 · 34 (14)
DOI: 10.1002/adfm.202311551 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 27.12.2023. Verfasst von Yingying Xie und 16 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Science.
Abstract (Originalsprache)
Residual impurities such as lithium carbonate and hydroxide are a major concern for accelerating parasitic reactions at the cathode electrolyte interface of lithium‐ion batteries. Removal of these lithium‐bearing species becomes a necessity for high‐performance nickel‐rich cathode materials. Instead of directly removing these impurities through washing steps, a wet impregnation process is employed to convert these detrimental surface impurities into beneficial surface coating on nickel‐rich cathode materials. Specifically, the pristine cathode material is treated with Al(H 2 PO 4 ) 3 solution to convert undesired compounds into Li 3 PO 4 and AlPO 4 , both of which are considered positive surface coating materials for high‐voltage cathodes. It is found that the introduced modification greatly suppresses the interfacial impedance hike and improves the capacity retention of the cathode material after repeating charging/discharging. It is believed that these benefits are realized through the modification of the surface chemistry of the cathode material, which helps to slow down the parasitic reactions and reduce the damage to the cathode material.
Förderung
- U.S. Department of Energy
- Office of Energy Efficiency and Renewable Energy
- Office of Science
- Basic Energy Sciences
Zitieren
APA
Xie, Y., Li, J., Li, M., Cai, J., Huang, X., Nguyen, H., Yu, L., Huo, D., Yang, Z., Karami, N., Sulaiman, B. A. S., Chernova, N. A., Upreti, S., Prevel, B., Liu, Y., Wang, F., & Chen, Z. (2024). Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials. Advanced Functional Materials, 34(14). https://doi.org/10.1002/adfm.202311551
Vancouver
Xie Y, Li J, Li M, Cai J, Huang X, Nguyen H, et al. Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials. Advanced Functional Materials. 2024;34(14). doi:10.1002/adfm.202311551
BibTeX
@article{Xie2024,
author = {Xie, Yingying and Li, Jiantao and Li, Matthew and Cai, Jiyu and Huang, Xiaozhou and Nguyen, Hoai and Yu, Lei and Huo, Dewen and Yang, Zhenzhen and Karami, Niloofar and Sulaiman, Baasit Ali Shaik and Chernova, Natasha A. and Upreti, Shailesh and Prevel, Brad and Liu, Yuzi and Wang, Feng and Chen, Zonghai},
title = {Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials},
journal = {Advanced Functional Materials},
year = {2024},
volume = {34},
number = {14},
doi = {10.1002/adfm.202311551}
}
EUVIMED