EUVIMEDEUVIMED entdecken
Crossref

Flexible and Stretchable Liquid‐Metal Microfluidic Electronics Using Directly Printed 3D Microchannel Networks

Kento Yamagishi, Terry Ching, Nicole Chian, Martin Tan, Wenshen Zhou, Shao Ying Huang, Michinao Hashimoto

Advanced Functional Materials · 2024-08 · 34 (31)

DOI: 10.1002/adfm.202311219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 08.12.2023. Verfasst von Kento Yamagishi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Agency for Science, Technology and Research, Digital Manufacturing and Design Centre, Singapore University of Technology and Design.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes a method for fabricating microfluidic electronics with 3D interconnected networks by direct ink writing (DIW)‐based 3D printing. Existing 3D printing technologies have yet to simultaneously realize 1) direct printing of interconnected multilayered microchannels without supporting materials or post‐processing and 2) integration of electronic elements with microchannels during the process of printing. This research aims to develop a method to fabricate support‐free microchannels consisting of silicone sealant without the collapse of the extruded structure while integrating electronic elements during the fabrication by DIW. The injection of liquid metal into 3D‐printed microchannels allows the formation of electrical connections between 3D conductive networks and the embedded electronic elements, enabling the fabrication of flexible and stretchable liquid metal antenna coils. To demonstrate a practical application, 1) a skin‐attachable radio‐frequency identification (RFID) tag using a commercial skin‐adhesive plaster as a substrate and 2) free‐standing flexible wireless light‐emitting devices with a small footprint (21.4 mm × 15 mm) for potential implantable applications are produced. This technology will offer a new capability to realize the automated fabrication of stretchable printed circuits with 3D configuration of electrical circuits consisting of liquid metals.

Förderung

  • Agency for Science, Technology and Research
  • Digital Manufacturing and Design Centre, Singapore University of Technology and Design

Zitieren

APA

Yamagishi, K., Ching, T., Chian, N., Tan, M., Zhou, W., Huang, S. Y., & Hashimoto, M. (2024). Flexible and Stretchable Liquid‐Metal Microfluidic Electronics Using Directly Printed 3D Microchannel Networks. Advanced Functional Materials, 34(31). https://doi.org/10.1002/adfm.202311219

Vancouver

Yamagishi K, Ching T, Chian N, Tan M, Zhou W, Huang SY, et al. Flexible and Stretchable Liquid‐Metal Microfluidic Electronics Using Directly Printed 3D Microchannel Networks. Advanced Functional Materials. 2024;34(31). doi:10.1002/adfm.202311219

BibTeX
@article{Yamagishi2024,
  author = {Yamagishi, Kento and Ching, Terry and Chian, Nicole and Tan, Martin and Zhou, Wenshen and Huang, Shao Ying and Hashimoto, Michinao},
  title = {Flexible and Stretchable Liquid‐Metal Microfluidic Electronics Using Directly Printed 3D Microchannel Networks},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {31},
  doi = {10.1002/adfm.202311219}
}
Kostenlos starten →