EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tuning the Surface Energy of Hole Transport Layers Based on Carbazole Self‐Assembled Monolayers for Highly Efficient Sn/Pb Perovskite Solar Cells

Matteo Pitaro, Javier E. Sebastián Alonso, Lorenzo Di Mario, David Garcia Romero, Karolina Tran, Jane Kardula, Teodor Zaharia, Malin B. Johansson, Erik M. J. Johansson, Ryan C. Chiechi, Maria A. Loi

Advanced Functional Materials · 2024-12 · 34 (50)

DOI: 10.1002/adfm.202306571 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 13.08.2023. Verfasst von Matteo Pitaro und 10 weiteren Autor:innen. Die Arbeit wurde bisher 111-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Energimyndigheten.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, carbazole‐based self‐assembled monolayers (SAMs) have been utilized as hole transport layers (HTLs) in perovskite solar cells. However, their application in Sn or mixed Sn/Pb perovskite solar cells has been hindered by the poor wettability of the perovskite precursor solution on the carbazole surface. Here a self‐assembled bilayer (SAB) comprising a covalent monolayer (Br‐2PACz) and a noncovalent wetting layer (4CzNH 3 I) as the HTL in a Cs 0.25 FA 0.75 Sn 0.5 Pb 0.5 I 3 perovskite solar cell is proposed. It is demonstrated that the wetting layer completely solves the problem due to the higher polarity of the surface and, furthermore, the ammonium groups help in the passivation of trap states at the buried SAB/perovskite interface. The introduction of the SAB enhances the device reproducibility with an average efficiency of 18.98 ± 0.28% (19.45% for the best device), compared to 11.54 ± 9.36% (19.34% for the best device) for the SAM‐only devices. Furthermore, the improved perovskite processability on the SAB helps to increase the reproducibility of larger size device, where, a 12.5% efficiency for a 0.8 cm 2 active area device compared to 0.68% for the best SAM‐based solar cell is demonstrated. Finally, the device's operational stability is also improved to 358 hours (T 80% ), compared to 220 hours for the SAM‐based solar cell.

Förderung

  • Energimyndigheten

Zitieren

APA

Pitaro, M., Alonso, J. E. S., Mario, L. D., Romero, D. G., Tran, K., Kardula, J., Zaharia, T., Johansson, M. B., Johansson, E. M. J., Chiechi, R. C., & Loi, M. A. (2024). Tuning the Surface Energy of Hole Transport Layers Based on Carbazole Self‐Assembled Monolayers for Highly Efficient Sn/Pb Perovskite Solar Cells. Advanced Functional Materials, 34(50). https://doi.org/10.1002/adfm.202306571

Vancouver

Pitaro M, Alonso JES, Mario LD, Romero DG, Tran K, Kardula J, et al. Tuning the Surface Energy of Hole Transport Layers Based on Carbazole Self‐Assembled Monolayers for Highly Efficient Sn/Pb Perovskite Solar Cells. Advanced Functional Materials. 2024;34(50). doi:10.1002/adfm.202306571

BibTeX
@article{Pitaro2024,
  author = {Pitaro, Matteo and Alonso, Javier E. Sebastián and Mario, Lorenzo Di and Romero, David Garcia and Tran, Karolina and Kardula, Jane and Zaharia, Teodor and Johansson, Malin B. and Johansson, Erik M. J. and Chiechi, Ryan C. and Loi, Maria A.},
  title = {Tuning the Surface Energy of Hole Transport Layers Based on Carbazole Self‐Assembled Monolayers for Highly Efficient Sn/Pb Perovskite Solar Cells},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {50},
  doi = {10.1002/adfm.202306571}
}
Kostenlos starten →