EUVIMEDEUVIMED entdecken
Crossref

Morphology Control of Li 2 S Deposition via Geometrical Effect of Cobalt‐Edged Nickel Alloy to Improve Performance of Lithium–Sulfur Batteries

Yicheng Jiang, Sheng Liu, Xueping Gao, Guoran Li

Advanced Functional Materials · 2023-11 · 33 (45)

DOI: 10.1002/adfm.202304965 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 03.08.2023. Verfasst von Yicheng Jiang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 87 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rechargeable lithium–sulfur batteries operate based on the interconversion between sulfur and Li 2 S. Due to its insoluble and insulated nature, Li 2 S deposition is kinetically sluggish, which has an important effect on performance of lithium–sulfur batteries. In this work, cobalt‐edged nickel alloy is designed and used as host material of sulfur cathodes to manipulate the behavior and morphology of Li 2 S deposition. It is found that Co and Ni have different catalytic kinetic characteristics for Li 2 S deposition reactions, and the difference in nucleation and growth rates of Li 2 S and geometrical effect of Co‐edged Ni alloy can cause a well‐spaced morphology to prevent premature surface passivation, thereby improving sulfur utilization and rate capability of the cathodes. As a result, the thick sulfur cathode using cobalt‐edged nickel as host material with a sulfur loading of 4.0 mg cm −2 shows an initial capacity of 1229.3 mA h g −1 at electrolyte/sulfur ratio of 8 µL mg −1 , as well as high capacity retention of 92.2% at 0.2 C during 100 cycles. These results provide an alternative perspective not only for developing new mixed host materials for lithium–sulfur batteries, and also for further understanding the existing works using composite host materials.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Jiang, Y., Liu, S., Gao, X., & Li, G. (2023). Morphology Control of Li 2 S Deposition via Geometrical Effect of Cobalt‐Edged Nickel Alloy to Improve Performance of Lithium–Sulfur Batteries. Advanced Functional Materials, 33(45). https://doi.org/10.1002/adfm.202304965

Vancouver

Jiang Y, Liu S, Gao X, Li G. Morphology Control of Li 2 S Deposition via Geometrical Effect of Cobalt‐Edged Nickel Alloy to Improve Performance of Lithium–Sulfur Batteries. Advanced Functional Materials. 2023;33(45). doi:10.1002/adfm.202304965

BibTeX
@article{Jiang2023,
  author = {Jiang, Yicheng and Liu, Sheng and Gao, Xueping and Li, Guoran},
  title = {Morphology Control of Li 2 S Deposition via Geometrical Effect of Cobalt‐Edged Nickel Alloy to Improve Performance of Lithium–Sulfur Batteries},
  journal = {Advanced Functional Materials},
  year = {2023},
  volume = {33},
  number = {45},
  doi = {10.1002/adfm.202304965}
}
Kostenlos starten →