Boosted Photocurrent via Heating BiFeo 3 Thin Film for UV Photodetector at Wide Temperature Range
Advanced Functional Materials · 2023-08 · 33 (35)
DOI: 10.1002/adfm.202303408 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 08.05.2023. Verfasst von Lili Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China, University of Chinese Academy of Sciences, Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
The current research on ferroelectric photovoltaic materials is concentrated on enhancing the output photocurrent. As solar cells operate at high temperatures, it is crucial to take into account the effect of increasing temperatures on ferroelectric photovoltaics. In this study, an LNO (lanthanum nickelate, LaNiO 3 )/BFO (bismuth ferrate, BiFeO 3 )/ITO (indium tin oxide) device is constructed on a mica substrate by sol–gel method. The device achieves output photocurrent enhancement at a wide temperature range (33–183 °C), with the largest photocurrent enhancement at 130 °C, which is 178% relative to room temperature, and the output power is also increased by 9.88 times. At the same time, compared with BFO bulk, it is found that the performance of BFO film is always higher than that of bulk in the test temperature range, and the output photocurrent of BFO film at room temperature is 104 times higher than that of bulk. This article investigates the effect of high temperatures on ferroelectric photovoltaics and also provides a strategy for enhancing the photovoltaic performance of ferroelectric films, providing guidance for future applications of ferroelectric films in flexible solar cells and other applications.
Förderung
- National Natural Science Foundation of China
- University of Chinese Academy of Sciences
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Yang, L., Wang, X., Bai, L., Xu, L., & Yang, Y. (2023). Boosted Photocurrent via Heating BiFeo 3 Thin Film for UV Photodetector at Wide Temperature Range. Advanced Functional Materials, 33(35). https://doi.org/10.1002/adfm.202303408
Vancouver
Yang L, Wang X, Bai L, Xu L, Yang Y. Boosted Photocurrent via Heating BiFeo 3 Thin Film for UV Photodetector at Wide Temperature Range. Advanced Functional Materials. 2023;33(35). doi:10.1002/adfm.202303408
BibTeX
@article{Yang2023,
author = {Yang, Lili and Wang, Xinjie and Bai, Liang and Xu, Lan and Yang, Ya},
title = {Boosted Photocurrent via Heating BiFeo 3 Thin Film for UV Photodetector at Wide Temperature Range},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {35},
doi = {10.1002/adfm.202303408}
}
EUVIMED