Alumina Nanoparticle Interfacial Buffer Layer for Low‐Bandgap Lead‐Tin Perovskite Solar Cells
Advanced Functional Materials · 2023-08 · 33 (35)
DOI: 10.1002/adfm.202303012 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 22.05.2023. Verfasst von Heon Jin und 10 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
Mixed lead‐tin (Pb:Sn) halide perovskites are promising absorbers with narrow‐bandgaps (1.25–1.4 eV) suitable for high‐efficiency all‐perovskite tandem solar cells. However, solution processing of optimally thick Pb:Sn perovskite films is notoriously difficult in comparison with their neat‐Pb counterparts. This is partly due to the rapid crystallization of Sn‐based perovskites, resulting in films that have a high degree of roughness. Rougher films are harder to coat conformally with subsequent layers using solution‐based processing techniques leading to contact between the absorber and the top metal electrode in completed devices, resulting in a loss of V OC , fill factor, efficiency, and stability. Herein, this study employs a non‐continuous layer of alumina nanoparticles distributed on the surface of rough Pb:Sn perovskite films. Using this approach, the conformality of the subsequent electron‐transport layer, which is only tens of nanometres in thickness is improved. The overall maximum‐power‐point‐tracked efficiency improves by 65% and the steady‐state V OC improves by 28%. Application of the alumina nanoparticles as an interfacial buffer layer also results in highly reproducible Pb:Sn solar cell devices while simultaneously improving device stability at 65 °C under full spectrum simulated solar irradiance. Aged devices show a six‐fold improvement in stability over pristine Pb:Sn devices, increasing their lifetime to 120 h.
Förderung
- Engineering and Physical Sciences Research Council
Zitieren
APA
Jin, H., Farrar, M. D., Ball, J. M., Dasgupta, A., Caprioglio, P., Narayanan, S., Oliver, R. D. J., Rombach, F. M., Putland, B. W. J., Johnston, M. B., & Snaith, H. J. (2023). Alumina Nanoparticle Interfacial Buffer Layer for Low‐Bandgap Lead‐Tin Perovskite Solar Cells. Advanced Functional Materials, 33(35). https://doi.org/10.1002/adfm.202303012
Vancouver
Jin H, Farrar MD, Ball JM, Dasgupta A, Caprioglio P, Narayanan S, et al. Alumina Nanoparticle Interfacial Buffer Layer for Low‐Bandgap Lead‐Tin Perovskite Solar Cells. Advanced Functional Materials. 2023;33(35). doi:10.1002/adfm.202303012
BibTeX
@article{Jin2023,
author = {Jin, Heon and Farrar, Michael D. and Ball, James M. and Dasgupta, Akash and Caprioglio, Pietro and Narayanan, Sudarshan and Oliver, Robert D. J. and Rombach, Florine M. and Putland, Benjamin W. J. and Johnston, Michael B. and Snaith, Henry J.},
title = {Alumina Nanoparticle Interfacial Buffer Layer for Low‐Bandgap Lead‐Tin Perovskite Solar Cells},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {35},
doi = {10.1002/adfm.202303012}
}
EUVIMED