EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

High‐Sensitivity Flexible Thermocouple Sensor Arrays Via Printing and Photonic Curing

Md Mofasser Mallick, Leonard Franke, Andres Georg Rösch, Mohamed Hussein, Zhongmin Long, Yolita M. Eggeler, Uli Lemmer

Advanced Functional Materials · 2024-05 · 34 (20)

DOI: 10.1002/adfm.202301681 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 26.05.2023. Verfasst von Md Mofasser Mallick und 6 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Deutsche Bundesstiftung Umwelt, Horizon 2020 Framework Programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite remarkable advances, high‐performance thermoelectric (TE) materials‐based thermocouples (TCs) lack mechanical robustness and flexibility. Hence, conventional low Seebeck coefficient metals (Ni, Cu, Fe) wire‐junction‐based TCs are used for temperature sensor applications. However, not only the sensitivity of the metal‐based TC sensor is low, but also it is very difficult to fabricate a pixelated sensor using the conventional approach. In this study, high‐performance (SbBi) 2 (TeSe) 3 ‐based printed flexible TE materials are employed to fabricate two types of shape‐conformable TC‐based temperature sensor arrays with 25 pixels (TSA I and TSA II). Bi 0.5 Sb 1.5 Te 3 ‐based p‐type (p‐BST) printed TE film and copper are used to fabricate TSA I, and the p‐type film together with the Bi 2 Te 2.7 Se 0.3 ‐based n‐type (n‐BT) film is used to fabricate TSA II. A high average sensitivity (S exp ) value of ≈124 µV °C −1 for TSA I and ≈319 µV °C −1 for TSA II is attained with high linearity.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Deutsche Bundesstiftung Umwelt
  • Horizon 2020 Framework Programme

Zitieren

APA

Mallick, M. M., Franke, L., Rösch, A. G., Hussein, M., Long, Z., Eggeler, Y. M., & Lemmer, U. (2024). High‐Sensitivity Flexible Thermocouple Sensor Arrays Via Printing and Photonic Curing. Advanced Functional Materials, 34(20). https://doi.org/10.1002/adfm.202301681

Vancouver

Mallick MM, Franke L, Rösch AG, Hussein M, Long Z, Eggeler YM, et al. High‐Sensitivity Flexible Thermocouple Sensor Arrays Via Printing and Photonic Curing. Advanced Functional Materials. 2024;34(20). doi:10.1002/adfm.202301681

BibTeX
@article{Mallick2024,
  author = {Mallick, Md Mofasser and Franke, Leonard and Rösch, Andres Georg and Hussein, Mohamed and Long, Zhongmin and Eggeler, Yolita M. and Lemmer, Uli},
  title = {High‐Sensitivity Flexible Thermocouple Sensor Arrays Via Printing and Photonic Curing},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {20},
  doi = {10.1002/adfm.202301681}
}
Kostenlos starten →