EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tungsten Boride Stabilized Single‐Crystal LiNi 0.83 Co 0.07 Mn 0.1 O 2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and Mechanisms

Qimeng Zhang, Qiang Deng, Wentao Zhong, Jing Li, Ziming Wang, Pengyuan Dong, Kevin Huang, Chenghao Yang

Advanced Functional Materials · 2023-07 · 33 (27)

DOI: 10.1002/adfm.202301336 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 17.04.2023. Verfasst von Qimeng Zhang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 69-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transition metal doped LiNiO 2 layered compounds have attracted significant interest as cathode materials for lithium‐ion batteries (LIBs) in recent years due to their high energy density. However, a critical issue of LiNiO 2 ‐based cathodes is caused particularly at highly delithiated state by irreversible phase transition, initiation/propagation of cracks, and extensive reactions with electrolyte. Herein, a tungsten boride (WB)‐doped single‐crystalline LiNi 0.83 Co 0.07 Mn 0.1 O 2 (SNCM) cathode is reported that affectively addresses these drawbacks. In situ/ex situ microscopic and spectroscopic evidence that B 3+ enters the bulk of the SNCM, enlarging the interlayer spacing, thus facilitating Li + diffusion, while W 3+ forms an amorphous surface layer consisting of Li x W y O z (LWO) and Li x B y O z (LBO), which aids the construction of a robust cathode‐electrolyte interphase (CEI) film, are shown. It is also shown that WB doping is effective in controlling the degree of the c‐axis contraction and release of oxygen‐containing gases at high voltages. The best doping concentration of WB is 0.6 wt.%, at which the capacity retention rate of the SNCM reaches 93.2% after 200 cycles at 2.7–4.3 V, while the morphology and structure of the material remain largely unchanged. The presented modification strategy offers a new way for the design of new stable SNCM cathodes for high‐energy‐density LIBs.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Zhang, Q., Deng, Q., Zhong, W., Li, J., Wang, Z., Dong, P., Huang, K., & Yang, C. (2023). Tungsten Boride Stabilized Single‐Crystal LiNi 0.83 Co 0.07 Mn 0.1 O 2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and Mechanisms. Advanced Functional Materials, 33(27). https://doi.org/10.1002/adfm.202301336

Vancouver

Zhang Q, Deng Q, Zhong W, Li J, Wang Z, Dong P, et al. Tungsten Boride Stabilized Single‐Crystal LiNi 0.83 Co 0.07 Mn 0.1 O 2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and Mechanisms. Advanced Functional Materials. 2023;33(27). doi:10.1002/adfm.202301336

BibTeX
@article{Zhang2023,
  author = {Zhang, Qimeng and Deng, Qiang and Zhong, Wentao and Li, Jing and Wang, Ziming and Dong, Pengyuan and Huang, Kevin and Yang, Chenghao},
  title = {Tungsten Boride Stabilized Single‐Crystal LiNi 0.83 Co 0.07 Mn 0.1 O 2 Cathode for High Energy Density Lithium‐Ion Batteries: Performance and Mechanisms},
  journal = {Advanced Functional Materials},
  year = {2023},
  volume = {33},
  number = {27},
  doi = {10.1002/adfm.202301336}
}
Kostenlos starten →