Surface Defect Suppression for High Color Purity Light‐Emitting Diode of Free‐Standing Single‐Crystal Perovskite Film
Advanced Functional Materials · 2023-07 · 33 (29)
DOI: 10.1002/adfm.202301205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 02.04.2023. Verfasst von Lutao Li und 13 weiteren Autor:innen. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 61 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
High color purity is one of the important features for single‐crystal metal halide perovskite light‐emitting diode (LED). Despite single‐crystal perovskite showing low bulk defect concentration, single‐crystal perovskite LEDs do not exhibit high color purity advantage due to the absence of effective surface defect passivation. Herein, one fully wrapped structure is proposed to passivate the surface of the free‐standing CsPbBr 3 single‐crystal films. The surface of CsPbBr 3 single‐crystal films is wrapped by ultra‐thin polymethyl methacrylate, precisely controlling the thickness. The single‐crystal perovskite film device can achieve high color purity with a full width at half maximum (FWHM) of 15.8 nm) and a large luminescent area of 2.25 mm 2 . It is observed that surface passivation is due to interaction of CO bond in polymer chains with the Lewis acid PbBr 2 . The passivated perovskite single‐crystal films significantly improve carrier lifetime and suppress surface defects. It is noteworthy that the passivated free‐standing single‐crystal perovskite films are feasible to build up a vertical LED device structure, avoiding the edge glowing and short‐circuiting of the LED device. This study demonstrates the large luminescent area of the high‐quality millimetre‐scale free‐standing single‐crystal films for wide color gamut display and vertical optoelectronic devices.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, L., Hu, Y., Chen, Y., Wang, C., Zhao, G., Du, X., Wang, C., Xiao, L., Lu, Z., Wang, J., Wang, D., Jie, J., Huang, J., & Zou, G. (2023). Surface Defect Suppression for High Color Purity Light‐Emitting Diode of Free‐Standing Single‐Crystal Perovskite Film. Advanced Functional Materials, 33(29). https://doi.org/10.1002/adfm.202301205
Vancouver
Li L, Hu Y, Chen Y, Wang C, Zhao G, Du X, et al. Surface Defect Suppression for High Color Purity Light‐Emitting Diode of Free‐Standing Single‐Crystal Perovskite Film. Advanced Functional Materials. 2023;33(29). doi:10.1002/adfm.202301205
BibTeX
@article{Li2023,
author = {Li, Lutao and Hu, Yun and Chen, Yuan and Wang, Chen and Zhao, Guoxiang and Du, Xinyu and Wang, Chaoqiang and Xiao, Lingbo and Lu, Zheng and Wang, Jiong and Wang, Dan and Jie, Jiansheng and Huang, Jingsong and Zou, Guifu},
title = {Surface Defect Suppression for High Color Purity Light‐Emitting Diode of Free‐Standing Single‐Crystal Perovskite Film},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {29},
doi = {10.1002/adfm.202301205}
}
EUVIMED