EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tough PEGgels by In Situ Phase Separation for 4D Printing

Zhenwu Wang, Matthias Heck, Wenwu Yang, Manfred Wilhelm, Pavel A. Levkin

Advanced Functional Materials · 2024-05 · 34 (20)

DOI: 10.1002/adfm.202300947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 08.04.2023. Verfasst von Zhenwu Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council, Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer gels, consisting of cross‐linked polymer network systems swollen by a solvent, show great potential in biomedicine, flexible electronics, and artificial muscles, due to their tissue‐like mechanical properties. Due to the presence of a large amount of solvent, the improvement of the mechanical properties of the polymer gel is a challenge. Moreover, combining high toughness with useful properties, such as 3D printability or shape‐memory, in one polymer gel system is even more challenging. In this study, a simple and efficient method is developed for the fabrication of tough polymer gels by polymerizing 2‐hydroxyethyl methacrylate (HEMA) in a mixture of poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG). The polymerized elastic networkpresents distinct compatibility with PEG (compatible) and PPG (poorly compatible), resulting in in‐situ phase separation at the microscale. The resulting phase‐separated gel demonstrates high strength (8.0 MPa), favorable fracture strain (430%), and large toughness (17.0 MJ m −3 ). The separated hard phasewith a high glass transition temperature (75 °C) endows the whole soft polymer gel with the property of shape memory at room temperature. Finally, the fabrication of tunable tough PEGgels is combined with 3D printing as well as with shape memory properties, demonstrating the use of PEGgels for 4D printing.

Förderung

  • China Scholarship Council
  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Wang, Z., Heck, M., Yang, W., Wilhelm, M., & Levkin, P. A. (2024). Tough PEGgels by In Situ Phase Separation for 4D Printing. Advanced Functional Materials, 34(20). https://doi.org/10.1002/adfm.202300947

Vancouver

Wang Z, Heck M, Yang W, Wilhelm M, Levkin PA. Tough PEGgels by In Situ Phase Separation for 4D Printing. Advanced Functional Materials. 2024;34(20). doi:10.1002/adfm.202300947

BibTeX
@article{Wang2024,
  author = {Wang, Zhenwu and Heck, Matthias and Yang, Wenwu and Wilhelm, Manfred and Levkin, Pavel A.},
  title = {Tough PEGgels by In Situ Phase Separation for 4D Printing},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {20},
  doi = {10.1002/adfm.202300947}
}
Kostenlos starten →