Managing Interfacial Hot‐Carrier Cooling and Extraction Kinetics for Inverted Ma‐Free Perovskite Solar Cells Over 23% Efficiency via Dion–Jacobson 2D Capping Layer
Advanced Functional Materials · 2023-06 · 33 (25)
DOI: 10.1002/adfm.202300576 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 09.03.2023. Verfasst von Yiting Zheng und 8 weiteren Autor:innen. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shanghai.
Abstract (Originalsprache)
While quasi‐2D perovskite is often used in inverted perovskite solar cells (PSCs) to improve the interfacial carrier transfer, the development of pure 2D perovskite with superior stability is rarely seen and the corresponding carrier‐extraction kinetics remains unclear. Here, a variety of hexatomic ring cations including piperidine, pyridine, and cyclohexane are introduced to modify the perovskite/electron transport layer interface. The Dion–Jacobson phase 2D cladding ( n = 1) based on 3‐(aminomethyl) piperidinium is proved to form a coordinated energy landscape and homogeneous surface potential distribution, and effectively prolong the electron diffusion length (≈1.58 µm) and accelerate the hot‐carrier extraction rate (2.5 times that of Control at 400 K). Furthermore, the quasi‐2D treatment ( n ≈ 3,4) demonstrated a slight escalation in short‐circuit current, but failed to inhibit the interdiffusion of Ag, Pb, and I under illumination. Finally, one of the state‐of‐art power conversion efficiency (PCE) for MA‐free inverted PSCs is achieved at 23.62% with increased open‐circuit voltage (≈1.15 V) and fill factor (≈82.8%). Most importantly, 89% and 93.6% of initial PCE are retained after 720 h under 85 °C heating and 1000 h under maximum power point tracking, illustrating satisfactory thermal and operational stability with pure 2D perovskite capping layer.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shanghai
Zitieren
APA
Zheng, Y., Wu, X., Zhuang, R., Tian, C., Sun, A., Tang, C., Liu, Y., Hua, Y., & Chen, C. (2023). Managing Interfacial Hot‐Carrier Cooling and Extraction Kinetics for Inverted Ma‐Free Perovskite Solar Cells Over 23% Efficiency via Dion–Jacobson 2D Capping Layer. Advanced Functional Materials, 33(25). https://doi.org/10.1002/adfm.202300576
Vancouver
Zheng Y, Wu X, Zhuang R, Tian C, Sun A, Tang C, et al. Managing Interfacial Hot‐Carrier Cooling and Extraction Kinetics for Inverted Ma‐Free Perovskite Solar Cells Over 23% Efficiency via Dion–Jacobson 2D Capping Layer. Advanced Functional Materials. 2023;33(25). doi:10.1002/adfm.202300576
BibTeX
@article{Zheng2023,
author = {Zheng, Yiting and Wu, Xueyun and Zhuang, Rongshan and Tian, Congcong and Sun, Anxin and Tang, Chen and Liu, Yuan and Hua, Yong and Chen, Chun‐Chao},
title = {Managing Interfacial Hot‐Carrier Cooling and Extraction Kinetics for Inverted Ma‐Free Perovskite Solar Cells Over 23% Efficiency via Dion–Jacobson 2D Capping Layer},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {25},
doi = {10.1002/adfm.202300576}
}
EUVIMED