Reconciling Mass Loading and Gravimetric Performance of MnO 2 Cathodes by 3D‐Printed Carbon Structures for Zinc‐Ion Batteries
Advanced Functional Materials · 2023-06 · 33 (26)
DOI: 10.1002/adfm.202215076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 27.03.2023. Verfasst von Hao Yang und 10 weiteren Autor:innen. Die Arbeit wurde bisher 79-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
To promote the real application of zinc‐ion batteries (ZIBs), reconciling the high mass loading and gravimetric performance of MnO 2 electrodes is of paramount importance. Herein, the rational regulation of 3D‐printed carbon microlattices (3DP CMs) enabling an ultrathick MnO 2 electrode with well‐maintained gravimetric capacities is demonstrated. The 3DP CMs made of graphene and carbon nanotubes (CNTs) are fabricated by direct ink 3D printing and subsequent high‐temperature annealing. 3D printing enables a periodic structure of 3DP CMs, while the thermal annealing contributes to high conductivity and defective surfaces. Due to these structural merits, uniform electrical field distribution and facilitated MnO 2 deposition over the 3DP CMs are permitted. The optimal electrode with MnO 2 loaded on the 3DP CMs can achieve a record‐high specific capacity of 282.8 mAh g −1 even at a high mass loading of 28.4 mg cm −2 and high ion transfer dynamics, which reconciles the loading mass and gravimetric performance. As a result, the aqueous ZIBs based on the 3DP CMs loaded MnO 2 afford an outstanding performance superior to most of the previous reports. This study reveals the essential role of interaction between active materials and current collectors, providing an alternative strategy for designing high‐performance energy storage devices.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
Zitieren
APA
Yang, H., Wan, Y., Sun, K., Zhang, M., Wang, C., He, Z., Li, Q., Wang, N., Zhang, Y., Hu, H., & Wu, M. (2023). Reconciling Mass Loading and Gravimetric Performance of MnO 2 Cathodes by 3D‐Printed Carbon Structures for Zinc‐Ion Batteries. Advanced Functional Materials, 33(26). https://doi.org/10.1002/adfm.202215076
Vancouver
Yang H, Wan Y, Sun K, Zhang M, Wang C, He Z, et al. Reconciling Mass Loading and Gravimetric Performance of MnO 2 Cathodes by 3D‐Printed Carbon Structures for Zinc‐Ion Batteries. Advanced Functional Materials. 2023;33(26). doi:10.1002/adfm.202215076
BibTeX
@article{Yang2023,
author = {Yang, Hao and Wan, Yi and Sun, Kang and Zhang, Mengdi and Wang, Chongze and He, Zhengqiu and Li, Qiang and Wang, Ning and Zhang, Yunlong and Hu, Han and Wu, Mingbo},
title = {Reconciling Mass Loading and Gravimetric Performance of MnO 2 Cathodes by 3D‐Printed Carbon Structures for Zinc‐Ion Batteries},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {26},
doi = {10.1002/adfm.202215076}
}
EUVIMED