Engineering Route for Stretchable, 3D Microarchitectures of Wide Bandgap Semiconductors for Biomedical Applications
Advanced Functional Materials · 2023-08 · 33 (34)
DOI: 10.1002/adfm.202211781 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 05.05.2023. Verfasst von Thanh‐An Truong und 19 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.
Abstract (Originalsprache)
Wide bandgap (WBG) semiconductors have attracted significant research interest for the development of a broad range of flexible electronic applications, including wearable sensors, soft logical circuits, and long‐term implanted neuromodulators. Conventionally, these materials are grown on standard silicon substrates, and then transferred onto soft polymers using mechanical stamping processes. This technique can retain the excellent electrical properties of wide bandgap materials after transfer and enables flexibility; however, most devices are constrained by 2D configurations that exhibit limited mechanical stretchability and morphologies compared with 3D biological systems. Herein, a stamping‐free micromachining process is presented to realize, for the first time, 3D flexible and stretchable wide bandgap electronics. The approach applies photolithography on both sides of free‐standing nanomembranes, which enables the formation of flexible architectures directly on standard silicon wafers to tailor the optical transparency and mechanical properties of the material. Subsequent detachment of the flexible devices from the support substrate and controlled mechanical buckling transforms the 2D precursors of wide band gap semiconductors into complex 3D mesoscale structures. The ability to fabricate wide band gap materials with 3D architectures that offer device‐level stretchability combined with their multi‐modal sensing capability will greatly facilitate the establishment of advanced 3D bio‐electronics interfaces.
Förderung
- Australian Research Council
Zitieren
APA
Truong, T., Nguyen, T. K., Huang, X., Ashok, A., Yadav, S., Park, Y., Thai, M. T., Nguyen, N., Fallahi, H., Peng, S., Dimitrijev, S., Toh, Y., Yamauchi, Y., Wang, C. H., Lovell, N. H., Rogers, J. A., Do, T. N., Nguyen, N., Zhao, H., & Phan, H. (2023). Engineering Route for Stretchable, 3D Microarchitectures of Wide Bandgap Semiconductors for Biomedical Applications. Advanced Functional Materials, 33(34). https://doi.org/10.1002/adfm.202211781
Vancouver
Truong T, Nguyen TK, Huang X, Ashok A, Yadav S, Park Y, et al. Engineering Route for Stretchable, 3D Microarchitectures of Wide Bandgap Semiconductors for Biomedical Applications. Advanced Functional Materials. 2023;33(34). doi:10.1002/adfm.202211781
BibTeX
@article{Truong2023,
author = {Truong, Thanh‐An and Nguyen, Tuan Khoa and Huang, Xinghao and Ashok, Aditya and Yadav, Sharda and Park, Yoonseok and Thai, Mai Thanh and Nguyen, Nhat‐Khuong and Fallahi, Hedieh and Peng, Shuhua and Dimitrijev, Sima and Toh, Yi‐Chin and Yamauchi, Yusuke and Wang, Chun Hui and Lovell, Nigel Hamilton and Rogers, John A. and Do, Thanh Nho and Nguyen, Nam‐Trung and Zhao, Hangbo and Phan, Hoang‐Phuong},
title = {Engineering Route for Stretchable, 3D Microarchitectures of Wide Bandgap Semiconductors for Biomedical Applications},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {34},
doi = {10.1002/adfm.202211781}
}
EUVIMED