Solid‐State Homojunction Electrochemical Transistors and Logic Gates on Plastic
Advanced Functional Materials · 2023-03 · 33 (13)
DOI: 10.1002/adfm.202211740 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 17.01.2023. Verfasst von In Cheol Kwak und 7 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Research Foundation.
Abstract (Originalsprache)
Organic electrochemical transistors (OECTs) have attracted significant attention due to their unique ionic–electronic charge coupling, which holds promise for use in a variety of bioelectronics. However, the typical electronic components of OECTs, such as the rigid metal electrodes and aqueous electrolytes, have limited their application in solid‐state bioelectronics that requires design flexibility and a variety of form factors. Here, the fabrication of a solid‐state homojunction OECT consisting of a pristine polymer semiconductor channel, doped polymer semiconductor electrodes, and a solid electrolyte is demonstrated. This structure combines the photo‐crosslinking of all of the electronic OECT components with the selective doping of the polymer semiconductor. Three Lewis acids (gold (III) chloride (AuCl 3 ), iron (III) chloride (FeCl 3 ), and copper (II) chloride (CuCl 2 ) ) are utilized as dopants for the metallization of the polymer semiconductor. The AuCl 3 ‐doped polymer semiconductor with an electrical conductivity of ≈100 S cm −1 is successfully employed as the source, drain, and gate electrodes for the OECT, which exhibited a high carrier mobility of 3.4 cm 2 V −1 s −1 and excellent mechanical stability, with negligible degradation in device performance after 5000 cycles of folding at a radius of 0.1 mm. Homojunction OECTs are then successfully assembled to produce NOT, NAND, and NOR logic gates.
Förderung
- National Research Foundation
Zitieren
APA
Kwak, I. C., Lee, Y., Kim, M. J., Choi, Y. J., Roe, D. G., Kang, M. S., Woo, H. Y., & Cho, J. H. (2023). Solid‐State Homojunction Electrochemical Transistors and Logic Gates on Plastic. Advanced Functional Materials, 33(13). https://doi.org/10.1002/adfm.202211740
Vancouver
Kwak IC, Lee Y, Kim MJ, Choi YJ, Roe DG, Kang MS, et al. Solid‐State Homojunction Electrochemical Transistors and Logic Gates on Plastic. Advanced Functional Materials. 2023;33(13). doi:10.1002/adfm.202211740
BibTeX
@article{Kwak2023,
author = {Kwak, In Cheol and Lee, Yoonjoo and Kim, Min Je and Choi, Young Jin and Roe, Dong Gue and Kang, Moon Sung and Woo, Han Young and Cho, Jeong Ho},
title = {Solid‐State Homojunction Electrochemical Transistors and Logic Gates on Plastic},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {13},
doi = {10.1002/adfm.202211740}
}
EUVIMED