Deformation Substructure Evolution and Strength–Corrosion Synergy in Multipass Rotary‐Swaged 5083 Al–Mg Alloy
Advanced Engineering Materials · 17.11.2026
DOI: 10.1002/adem.71410 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 17.11.2026. Verfasst von Fengxiang Wang und 7 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Simultaneously enhancing strength and corrosion resistance in nonheat‐treatable Al–Mg alloys remains challenging, as severe plastic deformation often introduces defects that deteriorate corrosion performance. In this study, multipass rotary swaging (RS) was applied to a 5083 Al–Mg alloy to investigate the relationship between deformation‐substructure evolution and strength–corrosion synergy. RS significantly increased the fraction of low‐angle grain boundaries and geometrically necessary dislocation density, while the average grain size remained nearly unchanged. Coarse intermetallic particles were progressively fragmented and more uniformly redistributed. At an equivalent strain of 1.52, the yield and ultimate tensile strengths increased from 208 and 340 MPa to 432 and 470 MPa, respectively, while the corrosion current density decreased from 0.871 to 0.327 μA·cm −2 . The strength enhancement arises primarily from deformation‐substructure strengthening, while the improved corrosion resistance is attributed to particle fragmentation and reduced microstructural heterogeneity. These findings demonstrate that multipass RS can coordinate deformation‐substructure evolution and microstructural homogenization, providing a promising route toward strength–corrosion synergy in 5xxx‐series aluminum alloys.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, F., Ren, J., Sun, Y., Zheng, C., Zhang, M., Chen, Y., Zhao, Y., & Sun, W. (2026). Deformation Substructure Evolution and Strength–Corrosion Synergy in Multipass Rotary‐Swaged 5083 Al–Mg Alloy. Advanced Engineering Materials. https://doi.org/10.1002/adem.71410
Vancouver
Wang F, Ren J, Sun Y, Zheng C, Zhang M, Chen Y, et al. Deformation Substructure Evolution and Strength–Corrosion Synergy in Multipass Rotary‐Swaged 5083 Al–Mg Alloy. Advanced Engineering Materials. 2026. doi:10.1002/adem.71410
BibTeX
@article{Wang2026,
author = {Wang, Fengxiang and Ren, Jian and Sun, Yuehua and Zheng, Chengsi and Zhang, Mingya and Chen, Yanning and Zhao, Yonghao and Sun, Wenwen},
title = {Deformation Substructure Evolution and Strength–Corrosion Synergy in Multipass Rotary‐Swaged 5083 Al–Mg Alloy},
journal = {Advanced Engineering Materials},
year = {2026},
doi = {10.1002/adem.71410}
}
EUVIMED