EUVIMEDEUVIMED entdecken
Crossref

Development of Lightweight UHMWPE Composite Panels by Positioning Stretchable Interlayers and Tailoring Fiber Orientation for Improved Low‐Velocity Impact Performance

Rinku Pramanick, Bhupendra Singh Butola, Abhijit Majumdar

Advanced Engineering Materials · 18.11.2026

DOI: 10.1002/adem.71395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 18.11.2026. Verfasst von Rinku Pramanick und 2 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Development of lightweight composites capable of mitigating low‐velocity impact‐induced blunt trauma is critically important for improved protection. The impact response of multilayered ultra‐high molecular weight polyethylene (UHMWPE) laminates has been investigated by many researchers in the last two decades. This study presents a development where thermoplastic polyurethane (TPU) film as an interlayer is strategically incorporated in UHMWPE composite panels to reduce near mid‐plane shear‐induced damage and back‐face deformation (BFD). All composite panels are fabricated via compression molding and tested at 100, 250 and 350 J energy using a low‐velocity impact tester. Viscoelastic behaviour is evaluated using dynamic mechanical analysis (DMA), and surface morphology is examined by scanning electron microscopy (SEM). Initially, an optimal sequence of cross‐ply with ±22.5° fiber‐oriented [CP/±22.5°] laminate shows the highest BFD reduction (60.48%) compared to ±30° (41.17%) and ±45° (34.77%). Moreover, symmetric placement of two TPU films near the mid‐plane of this [CP/±22.5°] panel doubles the impact load transferability and further reduces BFD by ~22%. Here, the intrinsic nature of TPU film improves viscoelastic energy dissipation and interlaminar shear management, while [CP/±22.5°] architecture governs the global laminate stiffness. The present approach exhibits that a combination of optimized fabrication, structural composition, and fiber orientation significantly reduces BFD in lightweight UHMWPE composite systems.

Zitieren

APA

Pramanick, R., Butola, B. S., & Majumdar, A. (2026). Development of Lightweight UHMWPE Composite Panels by Positioning Stretchable Interlayers and Tailoring Fiber Orientation for Improved Low‐Velocity Impact Performance. Advanced Engineering Materials. https://doi.org/10.1002/adem.71395

Vancouver

Pramanick R, Butola BS, Majumdar A. Development of Lightweight UHMWPE Composite Panels by Positioning Stretchable Interlayers and Tailoring Fiber Orientation for Improved Low‐Velocity Impact Performance. Advanced Engineering Materials. 2026. doi:10.1002/adem.71395

BibTeX
@article{Pramanick2026,
  author = {Pramanick, Rinku and Butola, Bhupendra Singh and Majumdar, Abhijit},
  title = {Development of Lightweight UHMWPE Composite Panels by Positioning Stretchable Interlayers and Tailoring Fiber Orientation for Improved Low‐Velocity Impact Performance},
  journal = {Advanced Engineering Materials},
  year = {2026},
  doi = {10.1002/adem.71395}
}
Kostenlos starten →