Composition Optimization of Cu–Ti Master Alloys via Thermodynamic‐Guided Solidification Control
Advanced Engineering Materials · 03.11.2026
DOI: 10.1002/adem.71389 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 03.11.2026. Verfasst von Wuteng Sun und 9 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Cu–Ti intermediate alloys with different Ti contents (25, 35, 50, and 60 wt.%) were fabricated via vacuum arc remelting. The effects of Ti content on solidification behavior and microstructural evolution were systematically investigated by combining CALPHAD thermodynamic calculations, differential scanning calorimetry analysis, in situ heating experiments, and phase characterization. The results show that, with increasing Ti content, the microstructural morphology exhibits different types of structures, including cellular eutectic, dendritic, and lamellar eutectic, and is accompanied by the presence of primary phase characteristics. Compared with other compositions, the Cu–50Ti alloy lies close to the eutectic region and exhibits a simplified solidification pathway with a single dominant melting response. Its microstructure is characterized by a small amount of primary CuTi 2 phase and a uniform CuTi + CuTi 2 lamellar eutectic structure. Comparative experiments using different Ti addition methods demonstrated that the optimized near‐eutectic Cu–50Ti master alloy improves compositional controllability during subsequent remelting and provides a practical approach for producing compositionally homogeneous Cu–Ti alloys.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Sun, W., Wang, Q., Li, L., Wang, K., Wang, W., Zhang, H., Gao, B., Sun, J., Wang, F., & Xu, B. (2026). Composition Optimization of Cu–Ti Master Alloys via Thermodynamic‐Guided Solidification Control. Advanced Engineering Materials. https://doi.org/10.1002/adem.71389
Vancouver
Sun W, Wang Q, Li L, Wang K, Wang W, Zhang H, et al. Composition Optimization of Cu–Ti Master Alloys via Thermodynamic‐Guided Solidification Control. Advanced Engineering Materials. 2026. doi:10.1002/adem.71389
BibTeX
@article{Sun2026,
author = {Sun, Wuteng and Wang, Qingjuan and Li, Longxin and Wang, Kuaishe and Wang, Wen and Zhang, Hang and Gao, Bin and Sun, Junpeng and Wang, Fei and Xu, Bofan},
title = {Composition Optimization of Cu–Ti Master Alloys via Thermodynamic‐Guided Solidification Control},
journal = {Advanced Engineering Materials},
year = {2026},
doi = {10.1002/adem.71389}
}
EUVIMED