EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Gallium Microalloying in Bi–Sn Solders: Interfacial Phase Formation, Wettability, and Long‐Term Shear Reliability Under Isothermal Aging

Iva Králová, Markéta Klimtová, Mohd Faizul Mohd Sabri, Yew Hoong Wong, Petr Veselý, Martin Plaček, Karel Dušek

Advanced Engineering Materials · 04.11.2026 · 28 (21)

DOI: 10.1002/adem.71233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 09.09.2026. Verfasst von Iva Králová und 6 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: České Vysoké Učení Technické v Praze.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low‐temperature Bi–Sn solders are promising candidates for next‐generation electronic packaging. However, the influence of gallium microalloying on interfacial reactions and mechanical performance, together with the combined effect of gallium and flux chemistry on wettability, remains insufficiently understood. This study systematically investigates 58Bi–42Sn, 57.5Bi–42Sn–0.5Ga, and 57Bi–42Sn–1Ga alloys in terms of melting behavior, wettability using three distinct fluxes at two solder bath temperatures, and intermetallic layer evolution and mechanical performance during annealing at 100 and 125 °C for up to 2000 h. Ga addition slightly reduced the melting temperature (∼133 °C) and enhanced the maximum wetting force under optimized flux conditions. Microstructurally, Ga redirected the interfacial reaction pathway by promoting formation of Cu 9 Ga 4 instead of the conventional Cu 6 Sn 5 /Cu 3 Sn bilayer. Although the Cu–Ga phase exhibited approximately 30% lower activation energy, intermetallic layer growth remained markedly suppressed because of lower diffusion coefficients and the limited Ga content available for layer thickening. Consequently, Ga‐containing joints developed thinner interfacial layers and avoided pronounced Sn depletion and Bi enrichment near the interface. These results demonstrate that Ga microalloying modifies both interfacial chemistry and processing behavior, making Ga‐containing Bi–Sn solders attractive for low‐temperature assembly.

Förderung

  • České Vysoké Učení Technické v Praze

Zitieren

APA

Králová, I., Klimtová, M., Sabri, M. F. M., Wong, Y. H., Veselý, P., Plaček, M., & Dušek, K. (2026). Gallium Microalloying in Bi–Sn Solders: Interfacial Phase Formation, Wettability, and Long‐Term Shear Reliability Under Isothermal Aging. Advanced Engineering Materials, 28(21). https://doi.org/10.1002/adem.71233

Vancouver

Králová I, Klimtová M, Sabri MFM, Wong YH, Veselý P, Plaček M, et al. Gallium Microalloying in Bi–Sn Solders: Interfacial Phase Formation, Wettability, and Long‐Term Shear Reliability Under Isothermal Aging. Advanced Engineering Materials. 2026;28(21). doi:10.1002/adem.71233

BibTeX
@article{Krlov2026,
  author = {Králová, Iva and Klimtová, Markéta and Sabri, Mohd Faizul Mohd and Wong, Yew Hoong and Veselý, Petr and Plaček, Martin and Dušek, Karel},
  title = {Gallium Microalloying in Bi–Sn Solders: Interfacial Phase Formation, Wettability, and Long‐Term Shear Reliability Under Isothermal Aging},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {21},
  doi = {10.1002/adem.71233}
}
Kostenlos starten →