EUVIMEDEUVIMED entdecken
Crossref

Effect of Micro‐Alloying Elements on the Interfacial Behavior and Properties of Diffusion‐Bonded Zirconium Alloys

Qi Wen, Zhenwen Yang, Ying Han, Qiwen Qiu, Lei Luo, Hongti Zhang, Shiyu Niu, Ying Wang

Advanced Engineering Materials · 04.11.2026 · 28 (21)

DOI: 10.1002/adem.71224 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 25.09.2026. Verfasst von Qi Wen und 7 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zirconium alloys are widely used as nuclear fuel cladding materials; however, achieving joints with both high strength and corrosion resistance remains challenging. In this work, diffusion bonding of Zr–Hf, Zr–Sn, and Zr–Sn–Nb alloys was systematically studied (760–840 °C, 10 MPa) to elucidate the roles of alloying elements in interfacial evolution and joint performance. Our findings show that micro‐alloying affects bonding through two coupled mechanisms: grain‐size‐dependent diffusion promotes interfacial void closure, particularly at the early bonding stage and at lower temperatures, while alloying‐element‐controlled reactions determine the type and distribution of interfacial precipitates, where Nb‐induced Zener pinning stabilizes a fine‐grained structure (~10 μm) and promotes rapid interface healing. After sufficient interfacial void closure has been achieved, alloying‐element‐controlled interfacial reactions mainly determine the type and distribution of interfacial precipitates, with Fe initiating reactions and Nb suppressing brittle Zr(Fe, Cr) 2 while promoting Zr(Fe, Nb) 2 formation. These mechanisms collectively determine joint properties. The Zr–Sn–Nb joint achieves the highest strength (356 MPa) but reduced corrosion resistance. In contrast, the Zr–Sn joint exhibits the best corrosion resistance while maintaining relatively high shear strength. This work provides insight into alloying–microstructure–interface relationships in zirconium alloy bonding.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wen, Q., Yang, Z., Han, Y., Qiu, Q., Luo, L., Zhang, H., Niu, S., & Wang, Y. (2026). Effect of Micro‐Alloying Elements on the Interfacial Behavior and Properties of Diffusion‐Bonded Zirconium Alloys. Advanced Engineering Materials, 28(21). https://doi.org/10.1002/adem.71224

Vancouver

Wen Q, Yang Z, Han Y, Qiu Q, Luo L, Zhang H, et al. Effect of Micro‐Alloying Elements on the Interfacial Behavior and Properties of Diffusion‐Bonded Zirconium Alloys. Advanced Engineering Materials. 2026;28(21). doi:10.1002/adem.71224

BibTeX
@article{Wen2026,
  author = {Wen, Qi and Yang, Zhenwen and Han, Ying and Qiu, Qiwen and Luo, Lei and Zhang, Hongti and Niu, Shiyu and Wang, Ying},
  title = {Effect of Micro‐Alloying Elements on the Interfacial Behavior and Properties of Diffusion‐Bonded Zirconium Alloys},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {21},
  doi = {10.1002/adem.71224}
}
Kostenlos starten →