EUVIMEDEUVIMED entdecken
Crossref

Enhanced Mechanical Performance of 3D‐Printed Continuous Fiber Reinforced Composites Through Nozzle Vibration‐Assisted Compaction

Sheng Qu, Jingze Feng, Zhongsen Zhang, Yesong Wang, Kunkun Fu, Yan Li, Wei Li

Advanced Engineering Materials · 19.08.2026 · 28 (16)

DOI: 10.1002/adem.71023 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 18.06.2026. Verfasst von Sheng Qu und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High porosity in 3D‐printed continuous fiber‐reinforced composites remains a major challenge, compromising the quality of the final parts. This study proposes a novel nozzle vibration‐assisted compaction technique using a voice coil motor to enhance the mechanical properties of 3D‐printed continuous fiber reinforced composites. A voice coil motor with controllable amplitude and frequency was integrated with the printing nozzle to apply periodic vibrations in the z ‐direction during the printing process. The effects of different vibration parameters (50 μm/5 Hz, 75 μm/5 Hz, 50 μm/10 Hz, 75 μm/10 Hz) on mechanical properties and microstructure were systematically investigated through three‐point bending tests, tensile tests, and microscopic analysis. Experimental results demonstrated that the optimal nozzle vibration‐assisted compaction parameters (50 μm/10 Hz) significantly enhanced flexural strength and modulus by 47.3% and 17.3%, tensile strength and modulus by 3.3% and 19.7%, respectively, while reducing porosity from 8.6% to 1.5%, providing an effective approach to improving the quality and expanding the application potential of 3D‐printed continuous fiber composites.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qu, S., Feng, J., Zhang, Z., Wang, Y., Fu, K., Li, Y., & Li, W. (2026). Enhanced Mechanical Performance of 3D‐Printed Continuous Fiber Reinforced Composites Through Nozzle Vibration‐Assisted Compaction. Advanced Engineering Materials, 28(16). https://doi.org/10.1002/adem.71023

Vancouver

Qu S, Feng J, Zhang Z, Wang Y, Fu K, Li Y, et al. Enhanced Mechanical Performance of 3D‐Printed Continuous Fiber Reinforced Composites Through Nozzle Vibration‐Assisted Compaction. Advanced Engineering Materials. 2026;28(16). doi:10.1002/adem.71023

BibTeX
@article{Qu2026,
  author = {Qu, Sheng and Feng, Jingze and Zhang, Zhongsen and Wang, Yesong and Fu, Kunkun and Li, Yan and Li, Wei},
  title = {Enhanced Mechanical Performance of 3D‐Printed Continuous Fiber Reinforced Composites Through Nozzle Vibration‐Assisted Compaction},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {16},
  doi = {10.1002/adem.71023}
}
Kostenlos starten →