EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Precipitation Simulations of the O‐Phase in Ti 2 AlNb Alloys Processed by Laser Powder Bed Fusion

Silvana Tumminello, Joachim Gussone, Suzana G. Fries, Marcus Rackel, Andreas Stark, Norbert Schell, Jan Haubrich, Guillermo Requena

Advanced Engineering Materials · 09.09.2026 · 28 (17)

DOI: 10.1002/adem.70963 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 30.05.2026. Verfasst von Silvana Tumminello und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DESY.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, computational models for phase precipitation were used to simulate the evolution of the O‐phase volume fraction during postprocessing of a Ti‐21Al‐25Nb (at.%) alloy processed by laser powder bed fusion and to study the phase transformations during subsequent heat treatments. The combination of computational simulations, thermodynamic models, and own experimental analysis allowed us to understand the sluggishness of the O‐phase isothermal precipitation in this alloy. To arrive at these conclusions and ensure that the simulations provided meaningful results, a thorough analysis of the input parameters was required to set up the calculations. A sensitivity analysis allowed quantification of the influence of these parameters on the phase fraction evolution. The interfacial energy of the matrix and precipitate phases was identified as the most relevant input parameter for the simulation of the volume fraction evolution during the aging process. This case study illustrates that computational thermodynamic and precipitation analysis provides a strong complementarity with experimental studies, enabling to tackle specific questions that are difficult to answer by designed experiments and even predict materials’ behavior.

Förderung

  • DESY

Zitieren

APA

Tumminello, S., Gussone, J., Fries, S. G., Rackel, M., Stark, A., Schell, N., Haubrich, J., & Requena, G. (2026). Precipitation Simulations of the O‐Phase in Ti 2 AlNb Alloys Processed by Laser Powder Bed Fusion. Advanced Engineering Materials, 28(17). https://doi.org/10.1002/adem.70963

Vancouver

Tumminello S, Gussone J, Fries SG, Rackel M, Stark A, Schell N, et al. Precipitation Simulations of the O‐Phase in Ti 2 AlNb Alloys Processed by Laser Powder Bed Fusion. Advanced Engineering Materials. 2026;28(17). doi:10.1002/adem.70963

BibTeX
@article{Tumminello2026,
  author = {Tumminello, Silvana and Gussone, Joachim and Fries, Suzana G. and Rackel, Marcus and Stark, Andreas and Schell, Norbert and Haubrich, Jan and Requena, Guillermo},
  title = {Precipitation Simulations of the O‐Phase in Ti 2 AlNb Alloys Processed by Laser Powder Bed Fusion},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {17},
  doi = {10.1002/adem.70963}
}
Kostenlos starten →