Microstructure Evolution and Wear Mechanism of NbC‐Reinforced 65Cr8MoNb X Coatings Fabricated by Laser Cladding
Advanced Engineering Materials · 22.07.2026 · 28 (14)
DOI: 10.1002/adem.70949 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 29.05.2026. Verfasst von Rui Shao und 8 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Incorporating niobium (Nb) into Fe–Cr–C alloys effectively enhances their mechanical properties. This study investigates how Nb content (0–4 wt.%) affects the microstructure and mechanical performance of a laser‐clad 65Cr8MoNb X coating, using the NbC area fraction as a key optimization indicator. The phase evolution was characterized via JMatPro, X‐ray diffraction, scanning electron microscope, and transmission electron microscopy. Experimental results show that as the Nb content increases from 2 to 4 wt.%, the area fraction of NbC precipitates increases correspondingly from (5.95 ± 0.79)% to (27.72 ± 1.35)%, and their size gradually increases. In correspondence, the microhardness of the coating slightly decreases from a peak of 622 HV at 2 wt.% to 604 HV at 3 wt.%, and then sharply drops to 451 HV at 4 wt.%, while the wear rate rises significantly. This indicates that excessive Nb addition impairs the mechanical properties of the coating. Wear mechanism analysis indicates a shift from abrasive wear (without NbC) to adhesive wear (with NbC). This work provides a basis for optimizing iron‐based wear‐resistant coatings.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Shao, R., Li, Z., Wang, Y., Lu, W., Feng, Z., Chen, M., Liu, X., Zhang, X., & Tang, A. (2026). Microstructure Evolution and Wear Mechanism of NbC‐Reinforced 65Cr8MoNb X Coatings Fabricated by Laser Cladding. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.70949
Vancouver
Shao R, Li Z, Wang Y, Lu W, Feng Z, Chen M, et al. Microstructure Evolution and Wear Mechanism of NbC‐Reinforced 65Cr8MoNb X Coatings Fabricated by Laser Cladding. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.70949
BibTeX
@article{Shao2026,
author = {Shao, Rui and Li, Ziyi and Wang, Yueyi and Lu, Wenjie and Feng, Zhongxue and Chen, Min and Liu, Xuyang and Zhang, Xuefeng and Tang, Aitao},
title = {Microstructure Evolution and Wear Mechanism of NbC‐Reinforced 65Cr8MoNb X Coatings Fabricated by Laser Cladding},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {14},
doi = {10.1002/adem.70949}
}
EUVIMED