Hydrothermal Synthesis of MnO 2 and Hemp‐Derived Activated Carbon Composites for Tailored Electrochemical Performance
Advanced Engineering Materials · 22.07.2026 · 28 (14)
DOI: 10.1002/adem.70924 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 22.05.2026. Verfasst von Kanisorn Klangvijit und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
This study investigates hydrothermal synthesis of manganese dioxide composited with hemp‐derived activated carbon (MnO 2 /AC) as electrodes for supercapacitors. The effects of key hydrothermal parameters, including carbon ratio, reaction temperature, and reaction time were systematically examined. Phase‐pure α‐MnO 2 was uniformly anchored on carbon framework. Morphology of MnO 2 evolved from nanowalls to well‐defined nanorods with increasing reaction temperature and time. Meanwhile, the specific surface area of MnO 2 /AC decreased from 1712 to 1538 m 2 g −1 due to partial pore blocking, while a predominantly mesoporous structure was retained. Electrochemical measurements in 1 M Na 2 SO 4 demonstrate that the optimized MnO 2 /AC composites achieve a specific capacitance of 216.8 F g −1 at 1 A g −1 . Charge‐storage mechanism analysis reveals a balanced contribution between surface‐controlled capacitive processes and diffusion‐controlled pseudocapacitance, which is directly correlated with preserved mesoporosity and moderate MnO 2 coverage. When the MnO 2 /AC composites were assembled into an asymmetric supercapacitor using AC as the negative electrode, the device operates stably up to 2.4 V and delivers outstanding cycling stability over 95% after 22,000 charge–discharge cycles at 5 A g −1 . These results demonstrate that controlled growth of MnO 2 , rather than maximum oxide loading, is essential for optimizing charge‐storage mechanisms and achieving high‐performance biomass‐derived supercapacitor electrodes.
Zitieren
APA
Klangvijit, K., Bowornthommatadsana, K., Reilly, M. P., Obata, M., Fujishige, M., Takeuchi, K., Wongwiriyapan, W., & Endo, M. (2026). Hydrothermal Synthesis of MnO 2 and Hemp‐Derived Activated Carbon Composites for Tailored Electrochemical Performance. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.70924
Vancouver
Klangvijit K, Bowornthommatadsana K, Reilly MP, Obata M, Fujishige M, Takeuchi K, et al. Hydrothermal Synthesis of MnO 2 and Hemp‐Derived Activated Carbon Composites for Tailored Electrochemical Performance. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.70924
BibTeX
@article{Klangvijit2026,
author = {Klangvijit, Kanisorn and Bowornthommatadsana, Khemjiranee and Reilly, Mayuree Phonyiem and Obata, Michiko and Fujishige, Masatsugu and Takeuchi, Kenji and Wongwiriyapan, Winadda and Endo, Morinobu},
title = {Hydrothermal Synthesis of MnO 2 and Hemp‐Derived Activated Carbon Composites for Tailored Electrochemical Performance},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {14},
doi = {10.1002/adem.70924}
}
EUVIMED