Weakening Effects of Aluminum on the Microstructure, Mechanical Properties, and Corrosion Resistance of High‐Velocity Arc‐Sprayed FeCrNiCoAl x High‐Entropy Alloy Coatings
Advanced Engineering Materials · 22.07.2026 · 28 (14)
DOI: 10.1002/adem.70909 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 08.05.2026. Verfasst von Zhenxing Tao und 7 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Current high‐entropy alloy (HEA) coating design strategies often rely on the assumption that the beneficial effects of aluminum (Al) addition—well‐documented for enhancing the wear and corrosion resistance of bulk HEAs—are directly transferable to coating systems. However, this study reveals that within the specific processing context of high‐velocity arc spraying (HVAS), Al conversely degrades the overall performance of HEA coatings. In this work, a series of FeCrNiCoAl x ( x = 0, 0.5, 1) HEA coatings were successfully fabricated on 45 steel substrates using the HVAS technique. The weakening mechanism of Al on the microstructure, mechanical properties, and corrosion resistance of these coatings was systematically investigated. The results revealed that the Al‐free coating exhibited superior wear and corrosion resistance under all tested conditions. This enhanced performance is attributed to its minimal porosity and single FCC phase structure, which mitigates the formation of multiphase galvanic couples. With increasing Al content, the coatings demonstrated a transition to more severe abrasive and oxidative wear mechanisms. The corrosion process was likewise exacerbated, driven by the increased porosity and the poor stability of the Al‐rich passive film in chloride‐rich environments. This demonstrates that the “Al‐strengthening” design principle is ill‐suited for the HVAS fabrication process.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Tao, Z., Zhang, H., Yang, N., Xu, Z., Tang, H., Zeng, J., Wei, C., & Wu, B. (2026). Weakening Effects of Aluminum on the Microstructure, Mechanical Properties, and Corrosion Resistance of High‐Velocity Arc‐Sprayed FeCrNiCoAl x High‐Entropy Alloy Coatings. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.70909
Vancouver
Tao Z, Zhang H, Yang N, Xu Z, Tang H, Zeng J, et al. Weakening Effects of Aluminum on the Microstructure, Mechanical Properties, and Corrosion Resistance of High‐Velocity Arc‐Sprayed FeCrNiCoAl x High‐Entropy Alloy Coatings. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.70909
BibTeX
@article{Tao2026,
author = {Tao, Zhenxing and Zhang, Hanzhao and Yang, NanPeng and Xu, Zhengbing and Tang, Hongqun and Zeng, JianMing and Wei, ChengXia and Wu, Bo},
title = {Weakening Effects of Aluminum on the Microstructure, Mechanical Properties, and Corrosion Resistance of High‐Velocity Arc‐Sprayed FeCrNiCoAl x High‐Entropy Alloy Coatings},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {14},
doi = {10.1002/adem.70909}
}
EUVIMED