EUVIMEDEUVIMED entdecken
Crossref

Effect of Boron Content on the Microstructure and Properties of FeCoNiCr 0.8 Al 0.2 High‐Entropy Alloys

Weijie Liu, Jingya Zhang, Chenglei Wang, Yunlong Zhang, Zhenchang Tang, Jiacheng Sun, Chaojie Liang, Ding Yang, Daxiang Li, Zijie Gao

Advanced Engineering Materials · 22.07.2026 · 28 (14)

DOI: 10.1002/adem.70903 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 10.05.2026. Verfasst von Weijie Liu und 9 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangxi Key Laboratory of Information Materials.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Balancing strength and ductility in face‐centered‐cubic (FCC) high‐entropy alloys remains a critical challenge. Here, boron microalloying is employed to tailor the microstructure of FeCoNiCr0.8Al0.2 alloys. All alloys retain an FCC matrix, while Cr 2 B precipitates at x ≥ 0.4, refining grains from 90–120 to ∼49.86 μm. Strengthening arises from the combined effects of interstitial solid solution, grain refinement, and Cr 2 B precipitation. The B0.8 alloy exhibits an optimized strength–ductility balance, with a yield strength of 610 MPa, tensile strength of 895 MPa, and elongation of 51%. This behavior is attributed to a semicontinuous Cr 2 B network that strengthens grain boundaries while maintaining matrix deformability. Excessive boron leads to embrittlement. In addition, boron improves wear resistance. These results demonstrate that controlled boron addition is an effective strategy for tuning the strength–ductility trade‐off in FCC high‐entropy alloys, highlighting the critical role of microstructural balance between strengthening phases and matrix plasticity.

Förderung

  • National Natural Science Foundation of China
  • Guangxi Key Laboratory of Information Materials

Zitieren

APA

Liu, W., Zhang, J., Wang, C., Zhang, Y., Tang, Z., Sun, J., Liang, C., Yang, D., Li, D., & Gao, Z. (2026). Effect of Boron Content on the Microstructure and Properties of FeCoNiCr 0.8 Al 0.2 High‐Entropy Alloys. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.70903

Vancouver

Liu W, Zhang J, Wang C, Zhang Y, Tang Z, Sun J, et al. Effect of Boron Content on the Microstructure and Properties of FeCoNiCr 0.8 Al 0.2 High‐Entropy Alloys. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.70903

BibTeX
@article{Liu2026,
  author = {Liu, Weijie and Zhang, Jingya and Wang, Chenglei and Zhang, Yunlong and Tang, Zhenchang and Sun, Jiacheng and Liang, Chaojie and Yang, Ding and Li, Daxiang and Gao, Zijie},
  title = {Effect of Boron Content on the Microstructure and Properties of FeCoNiCr 0.8 Al 0.2 High‐Entropy Alloys},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {14},
  doi = {10.1002/adem.70903}
}
Kostenlos starten →