EUVIMEDEUVIMED entdecken
Crossref

Electrophoretic Deposition of Chitosan/Hydroxyapatite/Zirconia Nanocomposite Coatings on Ti–6Al–4V Alloy: Corrosion Behavior and Biological Performance

Umut Beskan, Aylin Aytaç

Advanced Engineering Materials · 08.07.2026 · 28 (13)

DOI: 10.1002/adem.70852 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 28.04.2026. Verfasst von Umut Beskan und 1 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A nanobiocomposite coating composed of chitosan (CS), hydroxyapatite (HA), and zirconia (ZA) was developed to improve the corrosion resistance and biocompatibility of Ti–6Al–4V alloy. HA and ZA nanoparticles were synthesized via wet chemical precipitation and deposited on Ti–6Al–4V along with CS using electrophoretic deposition. The phase composition and microstructure of the nanoparticles and coatings were characterized by X‐ray diffraction and scanning electron microscopy. Coating thickness, surface roughness, and adhesion strength were measured, yielding an average thickness of 200 µm, Ra of 3.3 µm, and adhesion of 2.1 MPa, respectively. Electrochemical performance was assessed in simulated body fluid via open‐circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy. Corrosion resistance followed the order CS/HA/ZA > CS/HA > bare Ti–6Al–4V. Titanium ion release after 60 days of immersion was reduced from 57.0 ppb (bare alloy) to 22.9 ppb (CS/HA) and 14.9 ppb (CS/HA/ZA). In vitro cytotoxicity evaluated by MTT assay indicated enhanced biocompatibility of CS/HA/ZA coatings. These results demonstrate that incorporation of ZA into CS/HA coatings significantly improves both the electrochemical and biological performance of Ti–6Al–4V alloys, highlighting the potential of CS/HA/ZA nanobiocomposite coatings for biomedical applications.

Zitieren

APA

Beskan, U., & Aytaç, A. (2026). Electrophoretic Deposition of Chitosan/Hydroxyapatite/Zirconia Nanocomposite Coatings on Ti–6Al–4V Alloy: Corrosion Behavior and Biological Performance. Advanced Engineering Materials, 28(13). https://doi.org/10.1002/adem.70852

Vancouver

Beskan U, Aytaç A. Electrophoretic Deposition of Chitosan/Hydroxyapatite/Zirconia Nanocomposite Coatings on Ti–6Al–4V Alloy: Corrosion Behavior and Biological Performance. Advanced Engineering Materials. 2026;28(13). doi:10.1002/adem.70852

BibTeX
@article{Beskan2026,
  author = {Beskan, Umut and Aytaç, Aylin},
  title = {Electrophoretic Deposition of Chitosan/Hydroxyapatite/Zirconia Nanocomposite Coatings on Ti–6Al–4V Alloy: Corrosion Behavior and Biological Performance},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {13},
  doi = {10.1002/adem.70852}
}
Kostenlos starten →