EUVIMEDEUVIMED entdecken
Crossref

Engineering Mechanical and Bio‐Tribological Performance of Laser Powder Bed Fusion CoCrMo via Postprocessing Heat Treatment

Sangharatna M. Ramteke, Vijayabhaskara Rao Bhaviripudi, Jorge Ramos Grez, Dario F. Zambrano, Andreas Rosenkranz, Max Marian

Advanced Engineering Materials · 03.06.2026 · 28 (11)

DOI: 10.1002/adem.70770 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 13.04.2026. Verfasst von Sangharatna M. Ramteke und 5 weiteren Autor:innen. Die Arbeit nennt 92 Literaturangaben. Gefördert von: National Agency for Research and Development, Government of Chile.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (LPBF) enables the fabrication of complex CoCrMo alloy implants but introduces detrimental residual stresses that compromise their structural integrity and tribological performance. While heat treatment (HT) is a common stress‐relief strategy, its specific impact on the bio‐tribological behavior under physiologically relevant conditions remains unclear. Hence, this study elucidates the effect of HT (550°C, 675°C, 800°C, and 1100°C) on the microstructural evolution, stress relief, and bio‐tribological properties of LPBF‐fabricated CoCrMo. The microstructural analysis confirmed progressive stress relaxation, with recrystallization and extensive M 23 C 6 carbide/Cr 2 O 3 oxide formation dominating at 1100°C. The 1100°C HT reduced the main body (plates) wear by 25% and 50% under dry conditions and synovial fluid lubrication, respectively. The counter‐body (balls) wear was reduced by 40 and 60%, respectively, demonstrating a synergistic protective effect crucial for the longevity of biomedical implant systems. Raman spectroscopy revealed that the superior performance at 1100°C is governed by the formation of a multifunctional tribo‐layer, comprising lubricious Co 3 O 4 , graphitic carbon (dry) and a stable oxide‐phosphate film (lubricated). Our findings demonstrate that HT at 1100°C provides an optimal combination of complete stress relief, extreme hardness, and protective surface chemistry, establishing it as an excellent approach to enhance the longevity and reliability of biomedical implants.

Förderung

  • National Agency for Research and Development, Government of Chile

Zitieren

APA

Ramteke, S. M., Bhaviripudi, V. R., Grez, J. R., Zambrano, D. F., Rosenkranz, A., & Marian, M. (2026). Engineering Mechanical and Bio‐Tribological Performance of Laser Powder Bed Fusion CoCrMo via Postprocessing Heat Treatment. Advanced Engineering Materials, 28(11). https://doi.org/10.1002/adem.70770

Vancouver

Ramteke SM, Bhaviripudi VR, Grez JR, Zambrano DF, Rosenkranz A, Marian M. Engineering Mechanical and Bio‐Tribological Performance of Laser Powder Bed Fusion CoCrMo via Postprocessing Heat Treatment. Advanced Engineering Materials. 2026;28(11). doi:10.1002/adem.70770

BibTeX
@article{Ramteke2026,
  author = {Ramteke, Sangharatna M. and Bhaviripudi, Vijayabhaskara Rao and Grez, Jorge Ramos and Zambrano, Dario F. and Rosenkranz, Andreas and Marian, Max},
  title = {Engineering Mechanical and Bio‐Tribological Performance of Laser Powder Bed Fusion CoCrMo via Postprocessing Heat Treatment},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {11},
  doi = {10.1002/adem.70770}
}
Kostenlos starten →